Search Results

Heat transfer from the cylinder of internal combustion engines has been studied for decades, both in motored and fired configurations. Its understanding remains fundamental to the optimization of engine structures and sub-systems due to its direct effect on reliability, thermal efficiency and gaseous emissions. Experimental measurements are usually conducted using fast response surface thermometers, which give the instantaneous cylinder surface temperature. The transient component of heat flux through the cylinder wall was traditionally obtained from a spectral analysis of the surface temperature fluctuation, whereas the steady-state component was obtained from Fourier’s law of conduction. This computation inherently assumes that heat flows in one-dimension, perpendicular to the heated surface in a semi-infinite solid with constant thermo-physical properties.

The variation of in-cylinder heat transfer with parameters such as engine speed, air-to-fuel ratio, coolant temperature and compression ratio were frequently studied in classical research. These experimentally-obtained relationships are important for improving in-cylinder heat transfer models, essential in developing CO2 reducing strategies. In this publication, a 2.0 liter compression ignition engine was tested in the pressurized motored configuration. This developed experimental setup allowed testing of the engine at speeds ranging between 1400 rpm and 3000 rpm, with peak in-cylinder gas pressures from 40 bar to 100 bar. The engine was motored using different gas compositions chosen specifically to have ratios of specific heats of 1.40, 1.50, 1.60 and 1.67 at room temperature. This enabled motored testing with peak in-cylinder bulk gas temperatures ranging from 700 K to 1500 K.