Search Results

Measurements are presented of droplet characteristics and air velocity in the cylinder of a 0.36 litre four valve engine, equipped with an sohc VTEC-E valve train and port injection. The results show that injection at crank angles, θinj(s), when the inlet valve is open results in most of the liquid volume flux being in the form of droplets with Sauter mean diameter between 20 and 30 mm which strikes the sleeve up to about 2.5 cm below the exhaust valves, thus generating a locally rich cloud there. The amount of liquid phase gasoline passing through the plane 16 mm below the spark plug gap increases with θinj(s) up to 50 CA after intake TDC and this, together with the crank angle of droplet arrival and vapour generation, controls stratification of the gaseous fuel phase. The optimum injection time is when the fuel-rich cloud is generated so that the tumble vortex convects it to the spark plug at the time of ignition.

The droplet velocity, size and distributions of iso-octane fuel from single hole and twin jet air-assist injectors have been measured by phase Doppler velocimetry in the pent-roof for two cylinder head designs of firing four-valve engines running at 1500 rpm, together with the airflow during induction and compression. The use of the twin jet air-assist injector together with the introduction of a transfer-passage between the two intake ports of a Honda VTEC-E valve train arrangement resulted in reduction in ISNOx and COV-1mep of the order of half of those with the single hole injector design without a transfer passage. Droplets, for both heads and injectors, having passed the inlet valves, impinged directly onto the sleeve opposite to their entry without striking the exhaust valves and had velocities up to 30 m/s and Sauter mean diameters which varied from 20 to 50pm.