Search Results

An Engine Simulation Model was used to study the effect of in-cylinder swirl level on turbulence intensity and burn rate while holding the inducted kinetic energy constant. Experimental measurements of burn rate for three different swirl levels were obtained and compared with model predictions. The turbulence model used previously did not include wall shear effects and showed little enhancement of turbulence due to swirl, causing small changes in predicted burn rate when the swirl level was changed. An improved turbulence model is proposed which includes production of turbulence due to wall shear effects. Turbulence intensity predictions from the improved model resulted in excellent agreement between the measured and predicted burn rates as swirl level was changed. In addition, the model was used to predict the effect of swirl levels on ISFC. Results showed that ISFC changes were overall small for the range of swirl levels considered.

LDA measurements of the flow in a motored engine near TDC of compression have been obtained, along with burnrate data in a firing engine having a near-central spark plug location. Results are reported for two different intake ports and four intake valve lifts varying from 25% to 100% of full lift. Opposite trends of swirl vs valve lift were found for the two ports, and the rms velocity fluctuation was found to be relatively insensitive to changes in valve lift. Regression analysis of the burn duration data was conducted, with swirl ratio and rms as independent variables. The analysis indicated that burn duration decreases with an increase in swirl ratio and/or rms velocity fluctuation. In light of the experimental findings, a new conceptual model is proposed regarding the effect of valve lift on the dissipation of turbulent velocity via changes in the length scale.