Search Results

An exhaust gas purifying catalyst must be durable, i.e., it must maintain a sufficient catalytic performance even after thermal degradation. Therefore, large amounts of platinum group metals (PGMs), such as Pt, Pd, and Rh, should be loaded onto the catalyst substrate. Exhaust gas heat deteriorates the catalyst by sintering the PGM particles, which decreases the active surface area. It is important to reduce the PGM load and many researchers have therefore attempted to carry out PGM load reduction while maintaining sufficient durability. We found that Pt ions could form Pt-hydroxide clusters in a hexahydroxyplatinate (IV) (Pt(OH)6·H2O) nitric acid solution. The Pt-hydroxide cluster size could be controlled by varying the Pt and nitric acid concentrations and solution temperature.

A resin coating was applied to a piston skirt for use in an internal combustion engine to reduce the frictional resistance on its surface. The purpose of the authors' study was to observe the change in surface states with the addition of nylon and graphite to the coating as solid lubricant particles in order to investigate the tribological properties of the surface. The authors observed self-formed microdimples on the resin surface when nylon particles were added to the polyamide-imide (PAI) coating material. These microdimples functioned as oil reservoirs similar in size to the nylon particles. The authors used PAI as a binder, and graphite particles (5 μm) and two different grades (5 and 10 μm) of nylon-12 particles as additives. These materials were mixed in a solvent, and an aluminum test sample was coated. The test sample was then heated in an oven to cure the PAI. Next, the texture of the surface was observed.

We investigated the interaction between the platinum and oxide support based on the HSAB (Hard-Soft-Acid-Base) concept to obtain guidelines for a superior exhaust-gas purification catalyst. The Density Functional Theory (DFT) calculation provided the chemical potential (μ) and chemical hardness (η) via the eigenvalue of the Valence Band Maximum and Conduction Band Minimum. Moreover, it was found that the interaction depends on the μ and η, e.g., the metallic Pt cluster (Pt1, Pt3) had a greater interaction with the oxide supports having a lower η, on the other hand, the oxidized Pt cluster (Pt1O1, Pt1O2, Pt1O3, Pt1O4, Pt3O6) tends to be stabilized on the oxide support with a higher μ. These results could be explained by the HSAB concept. It was also found that the oxidation energy of the supported Pt cluster well corresponds to the actual valency of the supported Pt, furthermore, the particle size of the Pt after the thermal treatment depends on the μ of the oxide supports.