Search Results

Manganese oxide deposits which are exclusively in the form of Mn3O4, a benign form of manganese, are introduced in the exhaust stream from use of MMT, an octane-enhancing, emission-reducing fuel additive. The physical and chemical effect of these deposits on catalytic converters has generated some controversy in the literature. In this paper, we will focus on the effects that manganese oxide deposits have on catalytic converters. The physical effect of these deposits on the morphology of the converters was investigated by B.E.T surface area measurements, scanning electron microscopy (SEM), and x-ray fluorescence (XRF). The chemical effect was investigated with tests using both slave-engine dynamometers and a pulse-flame combustor to probe for differences in catalyst performance. Data from an extensive vehicle fleet which was tested according to a program designed in consultation with the EPA and the automobile industry will be presented.

The time of, and location where ignition first occurs in a diesel fuel spray were investigated in a rapid compression machine (RCM) using the two–dimensional techniques of silicone oil particle scattering imaging (SSI), and the planar laser induced fluorescence (LIF) of formaldehyde. Formaldehyde has been hypothesized to be one of the stable intermediate species marking the start of oxidation reactions in a transient spray under compression ignition conditions. In this study, the LIF images of the formaldehyde formed in a diesel fuel spray during ignition process have been successfully obtained for the first time by exciting formaldehyde with the 3rd harmonic of the Nd:YAG laser. SSI images of the vaporizing spray, and the LIF images of formaldehyde were obtained together with the corresponding time record of combustion chamber pressures at initial ambient temperatures ranging from 580 K to 790 K.

The effects of fuel composition and engine operating parameters on high-pressure, direct injection gasoline (DIG) injector plugging and deposit formation have been studied. The engine used was a conventional dual-sparkplug, 2.2-liter Nissan engine modified for direct injection using one of the spark plug holes. The engine was run under 20% rich conditions to accelerate deposit formation. A ten-fuel test matrix was designed around T90, sulfur level, and olefin levels indicated in the European gasoline specifications for year 2000. The gasolines, containing no detergents, were formulated using refinery stream blends to match the specified targets. Injector flow loss was monitored by fuel flow to the engine and monitoring oxygen sensors on each of the four cylinders. The impact of fuel composition on deposit formation and injector plugging is discussed. Injector flow loss was strongly influenced by injector tip temperature.