Search Results

The effect of external EGR on knock was evaluated using a CFR engine. Combustion pressure was sampled on a time basis. A band pass filter in the time domain was applied to the pressure cycles. Five knock indices were calculated for each combustion cycle. The problem to quantify knock intensity was focused. At this extent measurements were carried out on standard isooctane-n-heptane blends in the test conditions used for the determination of the Motor Method Octane Number (MON). Knock intensity was varied acting on compression ratio. For each index, the conditions of absence of knock were determined using motored cycles. The indices were compared and one of them, showing the lowest C.O.V., was selected for further measurements. The effect of EGR on test fuels having different composition was evaluated varying the compression ratio, at fixed ignition timing. In this way, the same level of detonation, obtained in the absence of EGR, was realized with different amount of external EGR.

A simple model of combustion and pollutant formation has been set up. It is part of an engine simulator to be used for the study of engine control strategies. The calculation of inlet and exhaust phases is performed by an emptying and filling method, based on the knowledge of mean inlet and exhaust conditions. A single zone thermodynamic model has been utilized for the calculation of the combustion phase. The values of the shape factors of heat release patterns have been modeled to take into account air/fuel ratio, EGR, load and turbulence at ignition starting. Crevice storage of unburned mixture has been considered as the dominant mechanism for unburned HC production. A model for mixing and burning of HC inside the cylinder has been proposed. NO is calculated using the three steps Zeldovich approach. The model produces realistic calculations of combustion pressure and pollutants emission at various speed, load, ignition timing and EGR.