Search Results

A new test bench has been set up and equipped in order to analyze the air mean motion and turbulence quantities in the combustion system of an automotive diesel engine with one helicoidal intake duct and a conical type in-piston bowl. A sophisticated HWA technique employing single- and dual-sensor probes was applied to the in-cylinder flow investigation under motored conditions. The anemometric probe was also operated as a thermometric sensor. An analytical-numerical procedure, based on the heat balance equations for both anemometric and thermometric wires, was refined and applied to compute the gas velocity from the anemometer output signal. The gas property influence, the thermometric sensor lag and the prong temperature effects were taken into account with this procedure. The in-cylinder velocity data were reduced using both a cycle-resolved approach and the conventional ensemble-averaging procedure, in order to separate the mean flow from the fluctuating motion.

As more stringent emission limits and low consumption requirements also involve s.i. 2-stroke engines, one of the most important design modifications that can cope with these constraints is to perform the scavenging process using pure air, which means not only fuel-free air but also oil-free air. A new single-cylinder prototype engine, equipped with a gasoline direct injection (GDI) apparatus has therefore been designed and built. In order to reduce manufacturing costs, this prototype was obtained by modifying a mass-produced 4-stroke 4-cylinder automotive engine. Apart from the replacement of the original indirect fuel feeding system with GDI, two more remarkable features should be pointed out: the use of a force-fed lubrication system, like those used in current 4-stroke engines and, as a consequence, the use of an external scavenging pump.

An integrated theoretical and experimental investigation was carried out in order to evaluate the effects that the pump delivery-valve assembly can produce on the performance of a pump-line-nozzle fuel-injection system with a distributor-type pump for automotive diesel engines. Four distinct delivery valves, one constant-pressure valve, one reflux-hole and two relief-volume valves, were separately fitted to the pump and for each configuration of the delivery assembly the system behavior was analyzed under full-load steady-state operations in a wide pump angular-speed range. Fuel injection-rate as well as local pressure time-histories were investigated, paying specific attention to the occurrence and temporal evolution of cavitation phenomena in the pressure pipe and injector nozzle, after the valve closure. The flow across the delivery-valve assembly was theoretically examined in order to ascertain any instability sources as possible causes of cyclic fluctuations.