Search Results

When considering a CTC (car to car) frontal crash between a small light car and a large heavy car, it is necessary to evaluate the stiffness and strength of each vehicle body. As interactive force at the contact surface cannot be measured directly in a car to car crash test, a simplified practical method has been developed to estimate the interactive force based on the vehicle deceleration. The adequacy and consistency of the proposed method was verified by using the principle of conservation of energy. The calculated force-deformation curves revealed that the interactive force reached the maximum designed strength of the small light car based on the ODB (Offset Deformable Barrier) test for crash protection, while the force level was far below the corresponding design limit of the large heavy car. It was observed that the relatively lower stiffness of the small light car resulted in absorbing a larger share of the total input energy of the system when crashed into the large heavy car.

In a CTC (car to car) crash, interaction between two vehicles is quite important. Interaction is primarily described by the contact area between two vehicles but interaction force (impact force) is also important for the entire crash phenomenon. In a frontal crash, impact force is resisted by the body structures, engine block, and tires. The resultant share of energy absorption, as well as the magnitude of body deformation, is greatly affected by the force profile. It is desired, therefore, to evaluate those factors of vehicle bodies in order to achieve CTC compatibility. There are some technical obstacles, however, in measuring those factors in testing. Impact force, for instance, cannot be measured directly in a CTC crash test unless load cells are installed in body frames. It is also difficult to analyze body deformation in a CTC crash test because both vehicles are moving.