Search Results

DISI engine emissions and fuel economy are strongly dependent upon fuel injection and spark timings, particularly when the engine is operating in stratified charge mode. Experimental studies of the effects of injection and spark timings and the interaction between these are described. The sensitivity of HC and NOx emissions to timings during stratified charge operation, the comparison of performance under stratified and homogeneous charge modes of operation and the rationale for mode switch point settings are investigated. The high sensitivity of emissions to injection and spark timing settings gives rise to potential robustness issues. These are described.

Optimising an engine specification to improve cold start performance has been investigated. Taguchi methods were used to define a test programme to assess the effect of seven build factors. Experiments were conducted to measure mixture ratio at the spark plug location after a short period of engine cranking at test conditions covering ± 15°C and three fuel-mass-supplied values. The analysis of the results identified build modifications which improved start quality and reduced HC and CO emissions substantially compared to a reference, base-line build. Injector design and location, and inlet valve timing were found to have most influence on robustness to uncontrolled variations in mixture preparation during starts.

A method for improving three-way catalyst (TWC) performance by superimposing a low frequency lean air-to-fuel ratio (AFR)bias perturbation onto the standard AFR oscillations is described. This observation of Catalyst Regeneration (CatRegen) has been attributed to a reactivation of poisoned precious metal sites on the catalyst surface. Preliminary tests under steady-state conditions show that there is a gradual reduction in TWC activity for NOx after a lean-rich transition, suggesting a temporary poisoning of the active precious metal sites on the TWC under rich conditions. This deactivation can be prevented by periodically exposing the catalyst to lean exhaust gas; which has led to the development of the CatRegen system.