Search Results

Comparative emission measurements were made in two dynamometer-based diesel engines using protocol specified by the U.S. Environmental Protection Agency (EPA) and the California Air Resources Board (CARB). A single JP-8 fuel with a sulfur level of 0.06 weight percent (wt%) was adjusted to sulfur levels of 0.11 and 0.26 wt%. The emission characteristics of the three fuels were compared to the 1994 EPA certification low-sulfur diesel fuel (sulfur level equal to 0.035 wt%) in the Detroit Diesel Corporation (DDC) 1991 prototype Series 60 diesel engine and in the General Motors (GM) 6.2L diesel engine. Comparisons were made using the hot-start transient portion of the heavy-duty diesel engine Federal Test Procedure. Results from the Army study show that the gaseous emissions for the DDC Series 60 engine using kerosene-based JP-8 fuel are equivalent to values obtained with the 0.035 wt% sulfur EPA certification diesel fuel.

The purpose of this work was to develop a series of octane reference fuels for road testing methanol fueled vehicles. Preliminary attempts to measure the research octane number of neat methanol by the standard ASTM test procedure produced anomalous results. This led to a more basic method of measuring the octane number based on the incipient knock compression ratio. The incipient knock method gave research and motor octane numbers of 112 and 88, respectively, for neat methanol. Research octane numbers of several methanol reference fuel blends prepared by adding octane enhancers and depressors were determined. The effects of spark timing and air/fuel mixture temperature on the incipient knock compression ratio of neat methanol were also examined.