Search Results

This paper provides a method that corrects errors induced by the empty-tunnel pressure distribution in the aerodynamic forces and moments measured on an automobile in a wind tunnel. The errors are a result of wake distortion caused by the gradient in pressure over the wake. The method is applicable to open-jet and closed-wall wind tunnels. However, the primary focus is on the open tunnel because its short test-section length commonly results in this wake interference. The work is a continuation of a previous paper [4] that treated drag only at zero yaw angle. The current paper extends the correction to the remaining forces, moments and model surface pressures at all yaw angles. It is shown that the use of a second measurement in the wind tunnel, made with a perturbed pressure distribution, provides sufficient information for an accurate correction. The perturbation in pressure distribution can be achieved by extending flaps into the collector flow.

The influence on aerodynamic drag of a non-uniform, streamwise pressure distribution over the wake of an automobile model in both open-jet and closed-jet wind tunnels is considered in this paper. It has long been an unsolved issue in the theory of open-jet interference and is usually not important in closed-wall wind tunnels unless the model is very long. A new, semi-empirical approach is presented that is based on the observation that the drag changes due to a pressure gradient over a wake correlate with the empty-test-section pressure-coefficient difference between the base of the vehicle and the position of wake closure. A method is demonstrated that is able to remove the effect of the pressure gradient and that is not buoyancy related. This method is applied to a range of simplified and detailed automobile shapes at model scale and at full scale in various wind tunnels, as well as to normal flat plates.