Search Results

In Brazilian market, Flex-Fuel vehicles represented over 90% of new light-duty vehicles sold in 2009. These vehicles can use gasoline blended with anhydrous ethanol (20 to 25% v/v), 100% of hydrous ethanol (contains from 6,2 to 7,4% w/w of water) or any blend of these fuels. An experimental investigation was done to study fuel consumption, emissions and in-cylinder pressure data of a Flex-Fuel Otto engine, 1.4 L, 4 cylinders. It used gasoline with 22% of anhydrous ethanol as a reference fuel (E22). E22 was blended with different hydrous ethanol contents such as 50% (H50) and 80% (H80), also a 100% hydrous ethanol H100) was used. The main fuel properties were analyzed as part of this work. To control the engine operation, a programmable ECU (Engine Control Unit) was used, allowing spark timing calibration either for maximum break torque (MBT) or to keep the engine below the knocking limit.

In Brazilian market, Flex-Fuel vehicles represented over 85% of new light-duty vehicles sold in 2010. These vehicles can use gasoline blended with anhydrous ethanol (18 to 25% v/v), 100% of hydrous ethanol (contains from 6,2 to 7,4% w/w of water) or any blend of these fuels. Some studies regarding Flex-Fuel technology are being made in Brazil, but there are not many published information about fuel properties of different ethanol-gasoline blends. Also, it is important to better understand emissions of aldehydes, unburned ethanol and total hydrocarbons of different ethanol blends on gasoline. A Flex-Fuel engine, 1.4 l, 4 cylinders was tested on a dynamometer. A FTIR (Fourier Transform Infrared analyzer) bench measured aldehydes, unburned ethanol and total hydrocarbons. It was used Gasoline with 25% of anhydrous ethanol was used as a reference fuel (E25). E25 was blended with different hydrous ethanol contents such as 30% (H30), 50% (H50), 80% (H80) and 100% (H100).

Injection system of internal combustion engines are directly lubricated by the fuel, being this ability known as lubricity. For gasoline fuels, although the lubricity requirement appears to be lower than other fuels, the concern is related to high pressure injection system used in direct injection engines, which might be more susceptible to intrinsic problems of lubricity. Still, few studies are available in the technical literature and the methodology for gasoline lubricity analysis is still object of study. In this sense, this paper aims to evaluate a modified HFRR test method with respect to its applicability to brazilian gasoline as well as the ethanol influence on lubricity. The results provide grounding on the practical test procedure under study.