Search Results

In order to improve the part-load and idling characteristics of 2-stroke cycle diesel engines, the effect of throttling on engine performance was investigated on a separately scavenged engine with a Roots blower and on a crankcase-scavenged engine. For the first engine, it was found that decreasing the delivery ratio through bypassing a part of scavenging air into the inlet side, that is, by recirculation of scavenging air, made it possible not only to decrease the fuel consumption but also to raise the scavenging temperature which improved combustion. Also, a vehicle test using a bus powered by the same type of engine showed improved mileage through throttling. For the crankcase-scavenged engine, it was found that a slight increase in delivery ratio was very effective for improving the performance at low speed with heavy load, and throttling was also effective in improving not only the part-load but also the idling operation.

In order to increase the air charge of crankcase-scavenged two-stroke cycle engines, the relations between delivery ratio and engine speed were investigated on a rotary disc-valve inlet port engine and on a conventional piston-valve inlet port engine by varying through wide limits the angle area and timing of the inlet port. For the inlet port configuration tested on the first engine, it was found that there was an optimum cut angle of the rotary disc valve, which produced a certain angle area. To improve the delivery ratio characteristics at a given speed, it was not necessary to change this angle area; it was effective to change only the timing of the inlet port by shifting the disc valve around the crankshaft. For the piston-valve inlet port engine, the results showed that a wide, low port, which was also found to have a higher flow coefficient, produced a higher delivery ratio over the entire engine speed range than a narrow, high port.

In order to improve fuel consumption, the effects of cylinder cutoff on engine performance were investigated on a 4-stroke cycle in-line 6-cy linder gasoline engine. It was found that the cylinder cutoff obtained by deactivating both the inlet and exhaust valves was very effective for reducing the fuel consumption at part-load and idle, as both the pumping power for the inlet and the power for activating the inlet and exhaust valves were noticeable decreased.