Search Results

In the last years new and stricter pollutant emission regulations together with raised cost of conventional fuels resulted in an increased use of gaseous fuels, such as Natural Gas (NG) or Liquefied Petroleum Gas (LPG), for passenger vehicles. Bi-fuel engines represent a transition phase product, allowing to run either with gasoline or with gas, and for this reason are equipped with two separate injection systems. When operating at high loads with gasoline, however, these engines require rich mixtures and retarded combustions in order to prevent from dangerous knocking phenomena: this causes high hydrocarbon (HC) and carbon monoxide (CO) emissions together with high fuel consumption.

Natural gas represents today maybe the most valid alternative to conventional fuels for road vehicles propulsion. The main constituent of natural gas, methane, is characterized by a high autoignition temperature, which makes the fuel highly resistant to knocking: this allows a considerable downsizing of the engine by means of supercharging even under high compression ratio. Starting from these considerations, the authors realized a thermodynamic model of a 4-cilynder s.i. engine for the prevision of in-cylinder pressure, employing a two-zone approach for the combustion and adding sub-models to account for gas properties change and knocking occurrence. An extensive experimental campaign has been carried out on the test bed, equipped with a naturally aspirated bi-fuel s.i. engine (i.e. an engine which can run either with gasoline or with compressed natural gas), so as to set the model constants to the best matching values.

As is known gaseous fuels, such as Liquefied Petroleum Gas (LPG) and Natural Gas (NG), thanks to their good mixing capabilities, allow complete and cleaner combustion than normal gasoline, resulting in lower pollutant emissions and particulate matter. Some of the automobile producers already put on the market “bi-fuel” engines, which may be fed either with standard gasoline or with LPG. These engines, endowed of two separate injection systems, are originally designed for gasoline operation; hence they do not fully exploit the good qualities of LPG, such as its better knocking resistance, which would allow higher compression ratios. Moreover, when running with gasoline at medium high loads, the engine is often operated with rich mixture and low spark advance (with respect to the maximum brake torque value) in order to prevent from dangerous knocking phenomena: this produces both high hydrocarbon and carbon monoxide emissions and high fuel consumption.

Bi-fuel spark ignition engines, nowadays widely spread, are usually equipped with two independent injection systems, in order run the engine either with gasoline or with gaseous fuel, which can be Natural Gas (NG) or Liquefied Petroleum Gas (LPG). These gases, besides lower cost and environmental impact, are also characterized by a higher knock resistance with respect to gasoline that allows to adopt a stoichiometric proportion with air also at full load. Gasoline, on the other hand, being injected as liquid, maintains higher volumetric efficiency and hence higher power output.