Search Results

The paper describes the research work concerning the simulation of 1D unsteady reacting flows in s.i. engine pipe-systems, including pre-catalysts and main catalysts. The numerical model GASDYN has been developed to enable the concurrent prediction of the wave motion in the intake and exhaust ducts, the chemical composition of the gas discharged by the cylinder of a s.i. engine, the chemical and thermal behavior of catalytic converters. The effect of considering the transport of chemical species with reactions in gas phase (post-oxidation of unburned HC in the exhaust manifold) and in solid phase (conversion of pollutants in the catalyst) on the predicted wave motion is reported.

Nowadays 1D fluid dynamic models are widely used by engine designers, since they can give sufficiently accurate predictions in short times, allowing to support the optimization and development work of any prototype. According to the last requirements in terms of pollutant emission control, some enhancements have been introduced in the 1D code GASDYN, to improve its ability in predicting the composition of the exhaust gas discharged by the cylinders and the transport of the chemical species along the exhaust system. The main aspects of the methods adopted to model the combustion process and the related formation of pollutants are described in the paper. To account for the burnt gas stratification, two different approaches have been proposed, depending on the expected turbulence levels inside the combustion chamber. The reliability of the simulation of the pollutant formation process has been enhanced by the integration of the thermodynamic module with the Chemkin code.

The paper describes the experimental and simulation work recently carried out to investigate the effects of secondary air injection on the emission conversion in the exhaust after-treatment system of a S.I. automotive engine. The modeling of the 1D unsteady reacting flows in the complete exhaust system of a spark ignition engine, designed to satisfy the Euro IV limits, has been performed including the secondary air injection system, to predict the possible shortening of catalyst light-off time and the speed-up of the after-treatment system warm-up. The transport of chemical species with reactions in gas phase (post-oxidation of unburned HC in the exhaust manifold) and in solid phase (conversion of pollutants in the catalyst) with and without secondary air has been simulated by the 1D thermo-fluid dynamic model GASDYN, developed by the authors.

This paper deals with some recent advances in the field of 1D fluid dynamic modeling of unsteady reacting flows in complex s.i. engine pipe-systems, involving a catalytic converter. In particular, a numerical simulation code has been developed to allow the simulation of chemical reactions occurring in the catalyst, in order to predict the chemical specie concentration in the exhaust gas from the cylinder to the tailpipe outlet, passing through the catalytic converter. The composition of the exhaust gas, discharged by the cylinder and then flowing towards the converter, is calculated by means of a thermodynamic two-zone combustion model, including emission sub-models. The catalytic converter can be simulated by means of a 1D fluid dynamic and chemical approach, considering the laminar flow in each tiny channel of the substrate.

The paper describes the 1-D fluid dynamic modeling of unsteady flows with chemical specie tracking in the ducts of a four-cylinder s.i. automotive engine, to predict the composition of the exhaust gas reaching the catalyst inlet. A comprehensive simulation model, based on classical and innovative numerical techniques for the solution of the governing equations, has been developed. The non-traditional shock-capturing CE-SE (Conservation Element-Solution Element) method has been extended to deal with the propagation of chemical species. A comparison of the MacCormack method plus FCT or TVD algorithms with the CE-SE method has pointed out the superiority of the latter scheme in the propagation of contact discontinuities. A realistic composition of the exhaust products in the cylinder, evaluated by a two-zone combustion model including emission sub-models, has been imposed at the opening of the exhaust valve, considering the effect of short-circuit of air during valve overlap.