Search Results

Orbital have been developing their stratified combustion process (Orbital Combustion Process OCP) for direct injection gasoline engines over the last 15 years, with successful production releases of the system in both the marine and automotive 2-stroke applications in 1996. This paper discusses how the same basic qualities of the air-assist fuel system and combustion process have been applied to automotive 4-stroke engines. The inherent qualities of the air- assist fuel system in combination with careful design of the combustion chamber has enabled high charge stratification with late injection timings and very stable combustion over a wide range of operating conditions. Experimental test data from a 4-cylinder, 16 valve 4-stroke development engine demonstrates the ability of this low pressure system to operate at very lean air/fuel ratios, with part load fuel economy improvements of up to 34 % at an operating condition equivalent to a vehicle speed of 40 km/hr.

A single-cylinder, 500cc research engine was tested under Spark-Ignition (SI) and Controlled Auto-Ignition (CAI) operation with similar load and speed conditions. Camshafts with low-lift and short duration, run with a negative valve overlap, were used to obtain CAI at wide open throttle. Two different camshaft profiles were tested in order to get a wide span of loads at 1200 and 2000rpm. The SI engine was Port Fuel-Injected (PFI) while the CAI engine was tested with both PFI and an Orbital Air-Assist Direct-Injection (DI) system. To reduce the high Indicated Specific Nitrogen Oxide (ISNOx) emissions at λ=1, 10% External Exhaust Gas Residuals (EEGR) was applied to the SI engine. EEGR reduced ISNOx emissions and there was slight reduction in ISFC. However, when the engine was tested in CAI mode, both ISNOx and ISFC were lower than the SI engine.