Search Results

Modern ‘DOC-cDPF’ systems for diesel exhaust are employing Pt-, Pd- as well as Pt/Pd alloy- based coatings to ensure high conversion efficiency of CO, HC even at low temperatures. Depending on the target application, these coatings should be also optimized towards NO2 generation which is involved in low temperature soot oxidation as well as in SCR-based deNOx. Zeolite materials are also frequently used to control cold-start HC emissions. Considering the wide variety of vehicles, engines and emission targets, there is no single optimum coating technology. The main target is therefore to maximize synergies rather than to optimize single components. At the same time, the system designer has nowadays a wide range of technologies to choose from, including PGM alloyed combinations (Pt/Pd), multiple layers and zones applicable to both DOCs and DPFs.

In real-world driving, the exhaust gas conditions in the particulate filter may induce incomplete filter regenerations. The implications of such partial regenerations are examined in this paper in terms of pressure drop and filter thermal loading. The methodology followed is based on a 2-D simulation model of the regeneration process. The model is initially fine-tuned and validated based on experimental results from engine bench testing. The validated model is subsequently employed to simulate a series of regenerations starting from different possible initial soot distribution patterns. The results are evaluated based on the calculated maximum thermal gradient in the filter that would produce the critical thermal stress for filter structural integrity. It is shown that the filter thermal loading can be significantly higher in case of initially non-uniform soot distribution.

The pressure for compact and efficient deNO systems has led to increased interest of incorporating SCR coatings in the DPF walls. This technology could be very attractive especially if high amounts of washcoat loadings could be impregnated in the DPF porous walls, which is only possible with high porosity filters. To counterbalance the filtration and backpressure drawbacks from such high porosity applications, the layered wall technology has already been proposed towards minimizing soot penetration in the wall and maximizing filtration efficiency. In order to deal with the understanding of the complex interactions in such advanced systems and assist their design optimization, this paper presents an advanced modeling framework and selected results from simulation studies trying to illustrate the governing phenomena affecting deNO performance and passive DPF regeneration in the above combined systems.