Search Results

The goal of this paper is to present a novel type of advanced acoustic material - micro grooved element (MGE) - which is designed for noise control in a wide range of applications. MGEs have been proved to offer a respectable alternative for the existing micro-perforated elements (MPEs), while being cost effective and causing low pressure loss. These elements have been found to be suitable for substitution of fibrous materials, typically present in silencer units. Currently, the cost of the MPEs is relatively high due to the technological complexity of manufacturing process. On the other hand, cheaper solutions of MPEs, based on irregularly shaped micro-apertures, potentially cause higher pressure loss due to surface roughness. The key concept of the MGEs is the use of micro-grooves forming acoustic channels, instead of the micro-holes of MPEs, which the sound wave has to pass.

In this paper a unique experimental facility designed for a complete determination of the sound transmission in turbochargers is introduced. The facility can be used to characterize the passive acoustic effect for turbocharger compressors and turbines working in realistic operating conditions by extracting the acoustic two-port data. The acoustic pressure transmission loss results for a passenger car turbocharger compressor and turbine measured in up- and downstream directions regarding the mean flow are presented. The data are obtained for various operating points of the turbocharger and the influence of operating conditions on the sound transmission is discussed.

Today, catalytic converters are widely used in small engine exhaust systems to reduce pollutants. Besides reducing harmful pollutants, these devices have a significant effect on the acoustical performance and the pressure drop of the engine exhaust system. A catalytic converter is known to have two distinct acoustic effects: the reactive effect originating from the acoustic wave reflections caused by cross-sectional area changes within the unit and the resistive effect which results in the acoustic wave dissipation caused by viscous losses. The pressure drop in the narrow tubes in the catalytic converter element results in frequency dependent resistive effects on the transmitted sound. In this paper the passive acoustic effect which treats the sound attenuation in the catalytic converters has been investigated. An experimental investigation on small engine catalytic converters treated as acoustic two-ports is carried out.

In order to increase the internal combustion engine efficiency turbocharging is today widely used. The trend, in modern engine technology, is towards higher boost pressures while keeping the combustion pressure raise relatively small. The turbocharger surge occurs if the pressure at the outlet of the compressor is greater than it can maintain, i.e., a reverse flow will be induced. In presence of such flow conditions instabilities will occur which can couple to incident acoustic (pressure) waves and amplify them. The main objective of the present work is to propose a novel method for investigation of turbocharger flow instabilities or surge precursors. The method is based on the determination of the acoustic two-port data. The active part of this data describes the sound generation and the passive part the scattering of sound. The scattering data will contain information about flow-acoustic interaction and amplification of sound that could occur close to surge.

Regulations stipulating the design of motorcycle silencers are strict, especially when the unit incorporates fibrous absorbing materials. Therefore, innovative designs substituting such materials while still preserving acceptable level of characteristic sound are currently of interest. Micro perforated elements are innovative acoustic solutions, which silencing effect is based on the dissipation of the acoustic wave energy in a pattern of sub-millimeter apertures. Similarly to fibrous materials the micro-perforated materials have been proved to provide effective sound absorption in a wide frequency range. Additionally, the silencer is designed as a two-stage system that provides an optimal solution for a variety of exploitation conditions. In this paper a novel design for a cruiser type motorcycle silencer, based on micro-perforated elements, is presented.