Search Results

As a result of the excavation of unconventional sources of natural gas, which has rich reserves, has attracted attention as a fuel for use in natural gas engines for power generation. From the viewpoints of efficient resource utilization and environmental protection, lean burn is an attractive technique for realizing a higher thermal efficiency with lower NOx emissions. However, ignition systems have to be improved for lean-burn operations. Laser ignition, which is expected to serve as an alternative to spark plug ignition, can decrease the heat loss and has no restriction on the ignition location because of the absence of an electrode. Consequently, an extension of the lean-burn limit by laser ignition has been demonstrated. In this study, we investigated the effects of the location and number of laser ignition points on engine performance and exhaust emissions. Laser ignition was also compared with conventional spark plug ignition.

This paper deals with the process regarding how dehydrogenation of soot particles takes place. The measured carbon/hydrogen ratios plotted against mean-diameter of soots fall on a straight line passing through the origin. It is shown that in the course of soot particle growth CM ratio increases linearly with the particle diameter: D. This is an indication of the fact that the number of carbon grows in proportion to D3, whereas that of hydrogen is proportional to D2. It is there by concluded that hydrogen sit only on surface of soot particles.

The Acceptability of boiloff hydrogen to an Inert Gas Circulating Hydrogen Diesel System, providing a high thermal efficiency, zero nitrogen oxides and carbon dioxide emissions, is discussed. To simulate a reciprocating engine cycle, a rapid compression-expansion machine is used. The machine brings fundamental data, such as hydrogen jet penetration injected in high pressure chamber and combustion characteristics. The results show an acceptable amount of hydrogen premixed to intake mixture without major negative effects. They suggest that most of boiloff hydrogen, inevitable in the facility where liquid hydrogen is used, could be supplied to the intake mixture as part of the fuel of the hydrogen diesel engine, saving a pumping loss to compress it up to an injection pressure.

We developed a novel ignition method called laser breakdown-assisted long-distance discharge ignition (LBALDI) that combines laser breakdown with a discharge to realize lean combustion. The creation of laser breakdown plasma between electrodes for discharge enables discharges over longer distances than those of conventional sparkplug as inferred from laser-triggered lightning or laser-triggered gas switches. This method should help realize volumetric ignition through the creation of a long-distance discharge. Experiments on the fundamental discharge and ignition of methane/air mixtures were conducted. The optimum incident time of the laser prior to the application of a high voltage was found to reduce the sparkover voltage and markedly reduce the voltage required by LBALDI under pressurized air conditions. In the ignition experiment, LBALDI showed the fastest heat release rate at the lean flammable limit.

Technology for the enhancement of compression ignition for a natural-gas homogeneous charge compression ignition (HCCI) engine was developed using nonthermal plasma. Specifically, nonthermal plasma was utilized to enhance the ignition of the methane/air premixture by irradiating it in an intake tube. The effect of the irradiation on compression ignition was investigated using a rapid compression and expansion machine; the ignition delay was found to shorten by the influence of irradiation. The dependence of the ignition delay time on the temperature at the end of compression was determined. Chemical analysis of the plasma-processed gas was performed using a gas detection tube as a simple method and ion-attachment ionization mass spectrometry (IAMS) as a novel method. A chemical kinetic simulation was also conducted to examine the temperature dependence of the ignition delay.