Search Results

The emissions reduction potential of neat GTL (Gas to Liquids: Fischer-Tropsch synthetic gas-oil derived from natural gas) fuels has been preliminarily evaluated by three different latest-generation diesel engines with different displacements. In addition, differences in combustion phenomena between the GTL fuels and baseline diesel fuel have been observed by means of a single cylinder engine with optical access. From these findings, one of the engines has been modified to improve both exhaust emissions and fuel consumption simultaneously, assuming the use of neat GTL fuels. The conversion efficiency of the NOx (oxides of nitrogen) reduction catalyst has also been improved.

The new Diesel Particulate active Reduction (DPR) system was developed for a medium-duty commercial vehicle as a deNOx catalyst combined with the conventional DPR system to achieve the Japan Post New-Long-Term (JPNLT) emissions regulations. It consists of a catalyst converter named as the new DPR cleaner, a fuel dosing injector, NOx sensors, temperatures and pressure sensors. The new DPR cleaner was constructed from a Front Diesel Oxidation Catalyst (F-DOC), a catalyzed particulate Filter (Filter), and a Rear Diesel Oxidation Catalyst (R-DOC). A newly developed Hydrocarbon Selective Catalyst Reduction (HC-SCR) catalyst was employed for each catalyst aiming to reduce NOx emissions with diesel fuel supplied from the fuel dosing injector. While the total volume of the catalyst was increased, the compact and easy-to-install catalyst converter was realized through the optimization of the flow vector and flow distribution in it by means of Computational Fluid Dynamics (CFD) analysis.

A 2-LEG NOx Storage-Reduction (NSR) catalyst system is one of potential after-treatment technology to meet stringent NOx and PM emissions standards as Post New Long Term (Japanese 2009 regulation) and US'10. Concerning NOx reduction using NSR catalyst, a secondary fuel injection is necessary to make fuel-rich exhaust condition during the NOx reduction, and causes its fuel penalty. Since fuel injected in the high-temperature (∼250 degrees Celsius) exhaust instantly reacts with oxygen in common diesel exhaust, the proportion of fuel consumption to reduce the NOx stored on NSR catalyst is relatively small. A 2-LEG NSR catalyst system has the decreasing exhaust flow mechanism during NOx reduction, and the potential to improve the NOx reduction and fuel penalty. Therefore, this paper studies the 2-LEG NSR catalyst system. The after-treatment system consists of NSR catalysts, a secondary fuel injection system, flow controlled valves and a Catalyzed Diesel Particulate Filter (CDPF).

For purpose of clarifying the effect of quantity of lubricating oil supplied to the seal lip portion on sealing characteristics of oil seals, relations between the typical constructional applications of the fitting portion for oil seals and the quantity of the lubricating oil supplied to the oil seals are discussed. Then the necessary minimum quantity of the lubricating oil for preventing the seal lip from wear is investigated. And it is clarified that the decrease in sealing characteristics occurs when the lubricating oil is supplied insufficiently to the seal lip portion and, finally, the countermeasure is discussed.

Valve stem seals are important to control consumption of lubricating oil for engines and to prevent an air pollution problem by unclean exhaust. It is required for valve stem seals to have stable characteristics of a controlled oil leakage related to frictional characteristics. In this papor, the concept of designing valve stem seals which possess the above characteristics have been discussed by applying an inverse problem of hydrodynamic lubrication.

Improvement of automotive fuel consumption is subject of saving energy today. Oil seals with low friction for automobile are required in the market. In this report, an idea for decreasing the friction of seals and its concreate countermeasure are discussed. It becomes clear that developed low friction seals have good sealing performance as same as present seals.

According to the 1982 Japanese Engine Data Book, 249 automobile engine models are used, including gasoline and diesel engines. Among them, 87 models (approximately 60% of all 4-cycle gasoline engine models), are designed for small passenger car applications, with displacements between 1.51 and 2.00. This paper will highlight the area such as Seals for Automobile Engine Applications, Present Automotive Engine Seal Situation in Japan and Countermeasure Activity for Field Claims.

Fine solid particles in a lubricating oil affect the sealing characteristics of oil seals, and their lives are shortened by the wear of oil seals and shafts created by the particles. Tests were carried out by using various kinds of foreign matters. The results showed that foreign matters in oil film between the sealing lip and the shaft surface directly caused the leakage. Consequently, it was reconfirmed that the practical application of dust lip and the countermeasure in the construction of seals or their housings were indispensable to obtain the long life and the stable operation of oil seals.

1 To meet the Japan Post New-Long-Term (Japan 2009) emissions regulation introduced in 2009, The Hydrocarbon Selective Catalytic Reduction (HC-SCR) system for the NOx emission with a diesel fuel was chosen among various deNOx after-treatment systems (the Urea-SCR, the NOx storage-Reduction Catalyst and so on). The HC-SCR was adopted, in addition to combustion modification of diesel engine (mainly cooled EGR) as the New DPR system. The New DPR system for medium and light duty vehicles was developed as a world's first technology by Hino Motors. Advantages of the New DPR are compact to easy-to-install catalyst converter and no urea solution (DEF) injection (regardless urea infrastructure) as compared the Urea-SCR system.

Achieving cleaner air throughout the world requires reducing diesel emissions. Therefore, after-treatment system without using a urea solution (DEF) called DPR-II has been developed in-house. It uses diesel fuel as a reducing agent (HC-SCR) to reduce NOx emission in diesel exhaust. The development of the fundamental technology could result in high NOx reduction performance at low to high temperature ranges, to meet the Japan 2016 emission regulation.