Search Results

Due to the limited energy resources as well as due to increasing CO2-emissions the importance of alternative- and biogene fuels increases continuously. Investigations of the engine operation were performed on a latest technology Liebherr engine for construction machines, which was operated using crude rapseed oil (ROR), rapseed methyl ester (RME) and synthetic Gas-To-Liquid fuel (GTL) without any change of ECU setting. On this occasion the combustion diagnostics, behaviour of the injection system and the pollutant emissions, including the unlimited nano-particles were especially assessed. For injection (with this unit pumps system) it can be stated, that ROR and a little bit less RME shorten the injection lag and increase the maximum injection pressure. At higher engine load this causes the 50% heat release a little earlier (1-2°CA) and as consequence higher NOx and lower specific energy consumption.

A modern HD-Diesel engine for construction machines, Liebherr D 934L (120kW) was set-up for a monofuel operation with crude, cold pressed rapeseed oil (ROR)*). The engine was equipped with a supplementary fuel filtration, supplementary engine & fuel heating for cold start and an appropriate fuel temperature control for the engine operation. A special lube oil was applied. After an extensive basic research of emissions including nanoparticles and energy consumption some adaptations of engine setting were performed: modification of the camshaft to eliminate the internal EGR (same valve timing and lift), earlier start of injection (SOI) at high- and full load, application of a combined exhaust gas aftertreatment system DPF+SCR, testing of DPF+SCR according to the VERT quality verification procedure.