Search Results

In modern direct injection gasoline engines, air-fuel mixing has a strong influence on combustion and emission characteristics, which in turn largely depends on in-cylinder fluid motion. However, in-cylinder fluid motion dependent on many engine parameters viz., piston shape, engine speed, intake manifold orientation, compression ratio, fuel injection timing, duration, etc. Among them, piston shape has significant influence on the in-cylinder fluid motion. Therefore, this study aims on evaluating the effect of piston shape on in-cylinder flows in a direct injection engine using CFD. In this study, a single-cylinder, two-valve, four-stroke direct injection engine designed for two-wheeler application in India is considered for the analysis. ‘STAR-CD’ and és-ice’ are used for CFD analysis. Pressure boundary values obtained from measurements in the actual engine are employed. Two piston-shapes viz., flat and bowl types at wide-open-throttle under non-firing conditions are considered.

In India, for two-wheeler application, carburettor is the preferred fuel supply system for majority of the market, owing to its simplicity and low cost. With the regulations becoming stringent, carburettor internal structure requires modification. One of the important parameters is the venturi shape, which controls the air-fuel mixture supply to the engine. Venturi shape plays an important role in deciding the transient performance characteristics. In this study, a CFD analysis has been carried out to predict the pressure and velocity at the venture of the carburettor. Four different cross sections namely, circular, oval, trapezoidal and double D venturi shapes were selected. The geometric model of the carburettor was created and mesh refinements were carried out in critical regions. At part open throttle, CFD prediction of airflow rate with Trapezoidal venturi shape was found higher when compared to other venturi shapes.

In order to achieve good fuel spray characteristics, proper placing of the fuel injector in the intake manifold in port fuel injected (PFI) gasoline engines is very crucial. In automotive PFI engines, vehicle layout may be a constraint to mount the fuel injector in best possible location and inclination. In general, PFI engines use straight spray fuel injection. However, if there is a vehicle layout constraint, then inclined fuel spray may be suitable which is not very common. Hence, it is important to understand the effect of fuel spray inclination on fuel spray characteristics. In this study, a CFD analysis has been carried out for the four inclinations of fuel spray and the results are compared. The geometrical modeling of the fuel injector is done using ProE software. It is meshed with polyhedral cells and mesh refinement is done wherever required. Inlet air velocity and exit pressure of intake pipe at wide-open-throttle conditions are used as boundary conditions.

In gasoline direct injection (GDI) engines, air-fuel mixture homogeneity plays a major role on engine performance, especially in combustion and emission characteristics. The performance of the engine largely depends on various engine operating parameters viz., start of injection, duration of injection and spark timing. In order to achieve faster results CFD is becoming a handy tool to optimize and understand the effect of these parameters. Therefore, this study aims on evaluating the two injection parameters viz., single and split injection to evaluate different flame characteristics. Novelty in this study is to define five different parameters which are called α, β, γ, δ and η the details of which are explained in the paper. In order to understand the flame characteristics, these five parameters are found to be very useful. In the present study, a single-cylinder, two-valve, four- stroke engine which is used in two-wheelers in India is considered for carrying out the CFD analysis.

Gasoline direct injection (GDI) technology is already in use in four wheeler applications owing to the additional benefits in terms of better combustion and fuel economy. The air-assisted in-cylinder injection is the emerging technology for gasoline engines which works with low pressure injection systems unlike gasoline direct injection (GDI) system. GDI systems use high pressure fuel injection, which provides better combustion and reduced fuel consumption. It envisages small droplet size and low penetration rate which will reduce wall wetting and hydrocarbon emissions. This study is concerned with a CFD analysis of an air-assisted injection system to evaluate mixture spray characteristics. For the analysis, the air injector fitted onto a constant volume chamber (CVC) maintained at uniform pressure is considered. The analysis is carried out for various CVC pressures, mixture injection durations and fuel quantities so as to understand the effect on mixture spray characteristics.