Search Results

CRASH3 based computer programs model a vehicle structure as a homogeneous body. Crush stiffness coefficients determined from full-overlap crash tests, when used in these computer programs allow for an accurate reconstruction of collisions where the accident damage profiles are full-overlap. The structures of vehicles, however, might not be purely homogeneous in their crush response. How accurately do crush stiffness coefficients that were determined from full-overlap crash tests represent the crush response of that same vehicle in a partial-overlap/offset frontal collision? Before this question can be answered a method needs to be developed for determining crush stiffness coefficients from partial-overlap/offset frontal test collisions. These crush stiffness coefficients then could be used in a comparative analysis of the crush response of vehicles tested in both full-overlap and partial-overlap/offset frontal collisions.

The CRASH3 computer program increasingly is being used by engineers as a tool to reconstruct automobile accidents. The damage analysis portion of CRASH3 provides a useful means for quantifying the change of velocity, ΔV, that was experienced by a vehicle during the collision phase of a traffic accident. The degree of usefulness of the damage analysis portion of the program, however, is dependent upon the availability of valid crush stiffness coefficients. Published crush stiffness coefficients are available for a large number of vehicles *[1] & [2]. These publications, however, contain only a limited number of coefficients that describe the stiffness characteristics of the side structure of vehicles. Engineers are often asked to perform an accident reconstruction when there are neither published stiffness coefficients for the side structure of an involved vehicle nor crash test data from which to determine the stiffness.

The accuracy of an accident reconstruction is dependent upon the availability and quality of relevant data. Often by the time an engineer is asked to reconstruct a traffic accident the only source of scene data is a police report. Important scene data, such as the point of impact and the points of rest of the vehicles, usually are set forth in the police report. Occasionally, however, the points of rest are not indicated in the police report and they can not be determined by other means. In a typical scenario a left turning “target” vehicle is struck on its right side by the front end of a “bullet” vehicle. The vehicles are available for inspection and the configuration of the roadway at the scene has not been altered since the time of the accident. The point of impact is set forth in the police report, however, the points of rest of the vehicles are not specified. No other sources of information regarding the points of rest of the vehicles are available.