Search Results

As part of the International Lubricant Standardization and Approval Committee's (ILSAC) goal of developing a global automatic transmission fluid (ATF) specification, members have been evaluating test methods that are currently used by various automotive manufacturers for qualifying ATF for use in their respective transmissions. This report deals with comparing test methods used for determining torque capacity in friction systems (shifting clutches). Three test methods were compared, the Plate Friction Test from the General Motors DEXRON®-III Specification, the Friction Durability Test from the Ford MERCON® Specification, and the Japanese Automotive Manufacturers Association Friction Test - JASO Method 348-95. Eight different fluids were evaluated. Friction parameters used in the comparison were breakaway friction, dynamic friction torque at midpoint and the end of engagement, and the ratio of end torque to midpoint torque.

The International Lubricant Standardization and Approval Committee (ILSAC) ATF subcommittee members have compared the two oxidation bench test methods, Aluminum Beaker Oxidation Test (ABOT) and Indiana Stirring Oxidation Stability Test (ISOT), using a number of factory-fill and service-fill ATFs obtained in Japan and in the US. In many cases, the ATFs were more severely oxidized after the ABOT procedure than after the same duration of the ISOT procedure. The relative severity of these two tests was influenced by the composition of the ATFs. The bench test oxidation data were compared with the transmission and the vehicle oxidation test data.

The study described in this paper covers the development of the Sequence IVB low-temperature valvetrain wear test as a replacement test platform for the existing ASTM D6891 Sequence IVA for the new engine oil category, ILSAC GF-6. The Sequence IVB Test uses a Toyota engine with dual overhead camshafts, direct-acting mechanical lifter valvetrain system. The original intent for the new test was to be a direct replacement for the Sequence IVA. Due to inherent differences in valvetrain system design between the Sequence IVA and IVB engines, it was necessary to alter existing test conditions to ensure adequate wear was produced on the valvetrain components to allow discrimination among the different lubricant formulations. A variety of test conditions and wear parameters were evaluated in the test development. Radioactive tracer technique (RATT) was used to determine the wear response of the test platform to various test conditions.

Using standard industry tests, the oxidation stability of General Motors current factory-fill automatic transmission fluid (ATF) was compared to that of a proposed factory-fill ATF to be introduced for the 1995 Model Year. Full-scale transmission tests and Aluminum Beaker Oxidation Tests run at various temperatures showed that a proposed factory-fill fluid is substantially more resistant to oxidation than the current factory-fill ATF. Using Total Acid Number increase (Δ-TAN) as the measure of oxidation, a minimum of 35% improvement was obtained with a proposed factory fill. This improvement at least doubles the time to “perceived fluid failure” (Δ-TAN = 2.5).

An integrated approach to modeling end of useful life of an automatic transmission fluid (ATF) has been developed. The flexible fluid life model allows either predictive or real-time calculations of the end of useful fluid life under different transmission design strategies and customer driver behaviors as reflected in operating temperatures, shift characteristics, fluid volume and fluid distribution throughout the transmission. An estimation of remaining useful fluid life is monitored using two metrics, namely bulk oxidation, as a general indicator of fluid quality, and frictional degradation, as an indicator of shift quality. As operating conditions increase in severity, ATF is subjected to conditions that may shorten its life. Using the developed technique, ATF useful life can be better predicted.

Twenty-two physical and chemical properties of a typical automatic transmission fluid were determined. In most cases the properties were determined over a range of temperatures. In general, air solubility, volumetric thermal expansion, and specific heat increase with increasing temperature; whereas, surface tension, specific gravity, viscosity, bulk modulus, density, thermal conductivity, and electrical resistivity decrease with increasing temperature.