Search Results

Hydrogen concentration during combustion in a confined space with a ceiling was investigated. The results indicated that steady-state hydrogen concentration was highest at the ceiling surface for all hydrogen flow rates. When hydrogen concentration was 10-20%, weak flame propagation occurred at the ceiling surface, with the most easily burnable spots being dented areas such as seams, pores and creases on the ceiling surface. The unstable and limited nature of flame propagation at the ceiling surface was attributed to the relationship between temperature and hydrogen concentration in a confined space.

Fuel cell vehicles represent a new system, and their safety has not yet been fully proved comparing with present automobile. Thorough safety evaluation is especially needed for the fuel system, which uses hydrogen as fuel, and the electric system, which uses a lot of electricity. The fuel cell stacks that are to be loaded on fuel cell vehicles generate electricity by reacting hydrogen and oxygen through electrolytic polymer membranes which is very thin. The safety of the fuel and electric systems should also be assessed for any abnormality that may be caused by electrolytic polymer membranes for any reasons. The purpose of our tests is to collect basic data to ultimately establish safety standards for fuel cell stacks. Methanol pool flame exposure tests were conducted on stationary use fuel cell stacks of two 200W to evaluate safety in the event of a fire.

The high-pressure hydrogen gas cylinder of a fuel-cell vehicle is equipped with a pressure relief device (PRD) to prevent the rupture of the cylinder due to heating by fire. Flame exposure tests (bonfire tests) are conducted to evaluate the safety of the cylinder with the PRD, specifically, cylinder resistance to fire and performance of the PRD. In this study, however, fire tests of vehicles equipped with high-pressure cylinders were not required for this test method. We implemented released-hydrogen flame tests by performing bonfire tests and fire tests on vehicles equipped with hydrogen-filled high-pressure gas cylinders (20,35MPa) to examine safety measures for fuel-cell vehicles. We then investigated the following: the characteristics of the released-hydrogen flame, radiation heat flux from the jet flame, combustion noise, the rate of pressure rise in the cylinder, the venting direction of the PRD, and behavior of fire in conjunction with a gasoline flame.