Search Results

The method of converting NOx with urea SCR is an effective solution for complying with the stringent NOx emission legislations of the future, particularly in the case of heavy duty diesel vehicles. In order to broaden the freedom of SCR catalyst design and volume design, a honeycomb structure formed with metal ion exchanged zeolite (NCH: New Concept Honeycomb) and for comparison a wash-coat type structure (conventional catalyst) were prepared. The possible range of catalyst volume reduction in NCH was investigated by comparative measurement of NH₃ adsorption distribution, consumption behavior of adsorbed NH₃ within the structures, and of space velocity and NO₂/NOx dependence of NOx conversion efficiency. In addition, from NEDC evaluation in an engine bench, it was found that combining urea injection logic suitable for NCH results in equal or higher NOx conversion efficiency and NH₃ slip characteristics with only 1/2 the volume of conventional catalyst structure.

To meet the legislation of future diesel emission level, high-performance catalysts are desired. One of the key technologies to realize the catalyst is to highly disperse the precious metal on the catalytic support with high specific surface area. The catalytic support with high specific surface area is directly extruded in honeycomb configuration (New honeycomb substrate) and, as a result, the amount of catalytic support and the surface area reached to around factor of two compared with the conventional catalytic support.

The trade-off between NOx and particulate matter (PM) has been a technological challenge with respect to diesel engine emissions. However, the practical use of diesel particulate filters (DPF) has made diesel emission control possible, in which NOx emissions are reduced through engine control and nearly all emitted PM is completely removed by DPF from diesel exhaust emissions. This has helped to contribute to laying the foundation for pursuing of the high theoretical thermal efficiency of diesel engines. However, it is also a fact that such emission controls have resulted in considerable impairments on the original and greatest advantages of diesel engines. This includes fuel penalties with accompanying increases in fuel consumption caused by pressure losses due to the attachment of the DPF itself and the accumulation of PM in the DPF, as well as fuel losses that occur when fuel is used to regenerate collected PM.

Diesel emission regulation becomes stringent more and more regarding both particulate matter (PM) and NOx in the worldwide. SCR coated DPF system is considered as one of the promising options for future diesel exhaust after-treatment because it has several benefits such as the downsizing of the system, quick light-off of the catalytic function due to mounting closed-couple position. To integrate the SCR converter into the DPF, it is necessary to design the DPF substrate's porosity higher and pore size larger than conventional DPF to improve SCR catalyst coating capability. However to make the porosity higher will lose the robustness in general. Against these problems, it was studied to improve the high porosity DPF performances by applying the new technology to modify the thermal shock resistance property.

Exhaust Gas Recirculation (EGR) is an effective method to reduce Nitrogen Oxide emissions. In recent years the trend of increasing EGR rate in-cylinders is an integral part of most improvements in combustion technology developments. The object of this work is to study the influence of EGR rate on the physical and chemical properties of soot particles. Soot from several operating points of a diesel engine run were collected on a high temperature filters. The pressure drop behavior during the soot loading was monitored then the soot permeability was calculated. Afterwards, the soot primary size was calculated from the obtained data and it showed good correspondence to the actual measurement. It is confirmed that all the soot primary sizes were around 22 nm in diameter. In contrast, the soot aggregate sizes and the soot concentrations were found to increase with increasing EGR rate. Subsequently, Oxidation tests were conducted to evaluate the reactivity of the soot.