Search Results

GDI (Gasoline Direct Injection) engine adopting new combustion control technologies was developed and introduced into Japanese domestic market in August of 1996. In order to extend its application to the European market, various system modifications have been performed. Injectors are located with a smaller angle to the vertical line in order to improve the combustion stability in the higher speed range. A new combustion control method named “two-stage mixing” is adopted to suppress the knock in the low speed range. As a result of this new method, the compression ratio was increased up to 12.5 to 1 while increasing the low-end torque significantly. Taking the high sulfur gasoline in the European market into account, a selective reduction lean-NOx catalyst with improved NOx conversion efficiency was employed. A warm-up catalyst can not be used because the selective reduction lean NOx catalyst requires HC for the NOx reduction.

The effects of injector deposits, combustion chamber deposits (CCD), and intake valve deposits (IVD) on exhaust emissions, fuel economy and engine performance have long been recognized in engine and fuel/detergent design. Because important elements of the engine design such as injector position, exhaust gas recirculation (EGR) ratio, and air fuel ratio (AFR) differ from those in port fuel injection (PFI) engines, direct injection spark-ignition (DISI) engines require specific evaluation methods. However, little data is available regarding engine deposits in the more recently produced DISI engines.

The effects of Injector deposits, Combustion Chamber Deposits (CCD), and Intake Valve Deposits (IVD) on exhaust emissions, fuel economy and vehicle performances have long been recognized in engine and fuel/detergent design. Because important elements of engine design such as injector position, exhaust gas recirculation (EGR) ratio, and air fuel ratio (AFR) differ from those of port fuel injection (PFI) engines, current existing test methods are not applicable. Therefore, the demand has been increasing year by year for specific evaluation methods for vehicles with direct injection spark ignition (DISI) engines which have spread rapidly worldwide. Oil and Auto Cooperation for International Standards (OACIS) of Japan selected the Mitsubishi DISI engine (4G93-1.8L) [1] and conducted engine bench tests to investigate the effects of deposits on operating conditions at 40km/h, 70km/h, 140km/h and WOT.