Search Results

The capability to predictively simulate occupant dynamics in vehicle rollover crashes using the Articulated Total Body (ATB/CVS) model was validated using the results of two controlled automobile rollover crash tests. The ATB model requires the occupant's inertial, geometric, and resistive joint torque properties, the vehicle interior geometry and motion, the contact characteristics for the occupant and vehicle interactions, and the seat belt characteristics. The validation was done by first simulating one test and adjusting the contact and belt properties to obtain good comparison with the test results. Then subsequent tests were simulated using the same properties, but changing only the input vehicle kinematics. Each occupant simulation used the standard Hybrid III data set and measured vehicle interior geometry. The vehicle kinematics were generated by simulating the vehicle dynamics with the ATB model. In one rollover, roof crush significantly affected the occupant's motion.

The objective of this study was to mathematically model several proposed vehicle glazing materials using derived force-deflection characteristics, validate the models' dynamic behavior, and use the resulting glazing models in simulations of occupant dynamics during vehicle rollover. Simulations were performed with the three-dimensional, multibody dynamics program, the Articulated Total Body (ATB) model. The contact characteristics of side windows of tempered glass; polymethyl methacrylimide, also referred to as PMMI; and polycarbonate; as well as windshields from Ford Tempos and Jeeps, were developed from headform impact tests. These characteristics were first validated by performing simulations of the headform impact tests, and were then included in rollover simulations. Previously validated simulations of belted driver and unbelted passenger dynamics during an actual rollover accident were used as the baseline simulations.

Sophisticated computer simulation of human response during various violent force exposure situations requires not only the validated programs, but also high quality databases, especially the data sets that characterize human body structures. Although anthropometric surveys and stereophotometric studies have been performed to create geometric and inertial property databases for the human body, there have been limited efforts on establishing the joint kinematics and resistive torque data sets. This paper presents the development, implementation, and validation of the human articulating joint model parameters for crash dynamics simulations. Measured human joint data on the voluntary range of motion and passive resistive torques were used to mathematically model the shoulder, elbow, hip, knee, and ankle joints.

In order to validate a Hybrid III dummy analytical simulation data set, a sled impact test was simulated in which both a Part 572 dummy and a Hybrid III dummy were used. Each dummy was restrained with a three-point belt system during the 32G sled test. The Crash Victim Simulator (CVS )/Articulated Total Body (ATB) model simulations were set up to reflect the same conditions as in the test and the previously developed standard Part 572 and the newly developed Hybrid III dummy body data sets were used. Graphics of the dummies' motion from the simulation are compared with films of the sled test. Accelerometer and load cell data from both the test and simulations are also used to demonstrate the validity of the CVS/ATB model for simulating the Hybrid III dummy dynamics.