Search Results

Cycle-to-cycle variation is one of the main factors for high fuel consumption and emissions of a two-stroke engine during the low-load and low-speed running. The increase of residual gas ratio due to the lower delivered amount of fresh scavenging air leads to a lower flame front speed and, therefore, to a slow combustion or even misfiring. The consequence is a very high level of unburnt hydrocarbons, since a large amount of fuel does not take part in the combustion process. The use of a direct injection system allows a more flexible management of the injection of fuel over subsequent engine cycles. Under a low-load condition, the low request in terms of brake mean effective pressure (BMEP) can be achieved by performing a load control based on an intermittent injection, thus reducing the need for intake throttling and avoiding the loss of fresh fuel resulting from cycles without combustion.

Two-stroke (2S) engines still play a key role in the global internal combustion engine (ICE) market when high power density, low production costs, and limited size and weight are required. However, they suffer from low efficiency and high levels of pollutant emissions, both linked to the short circuit of fuel and lubricating oil. Low- and high-pressure direct injection systems have proved to be effective in the reduction of fuel short circuiting, thus decreasing unburnt hydrocarbons and improving engine efficiency. However, the narrow time window available for fuel to be injected and homogenized with air, limited to few crank-angles, leads to insufficiently homogenized fuel-air mixtures and, as a consequence, to incomplete combustions. The use of prechambers can be a well-suited solution to avoid these issues.

A typical issue of the two-stroke engine in monitoring the combustion process is to measure the actual burning mixture with a conventional 02-sensor placed in the exhaust duct. In fact, the short circuit of fresh charge affects the correct acquisition of the residual oxygen associated to the completeness of the combustion process, leading to the overestimation of the trapped air-fuel ratio. In a conventional homogenously scavenged two-stroke engine, a possible solution to the aforementioned issue is the direct measurement of the mass flow rate of both the intake fresh air and the fuel delivered by the fuel supply system. This methodology cannot be applied to 2S direct injection engine because air and fuel are not premixed. The paper shows the application of a methodology for the evaluation of the trapped air-fuel ratio of the mixture inside the combustion chamber in a small two-stroke low pressure direct injection (LPDI) engine.