Search Results

The formation of NO2 in the cylinder of a diesel engine has been investigated using a total cylinder sampling technique and a simple kinetic model. Exhaust measurements of NO2 as a function of equivalence ratio and as function of time after engine start were made. Samples obtained by total cylinder sampling from an operating direct injection diesel engine showed NO2/NO ratios of 25 to 50%. This is much higher than the 1 to 3% which was measured in the exhaust. Simulations of the sampling process indicate that conversion of NO to NO2 is at least partially responsible for the high NO2/NO measurements. However, the processes which produce the NO to NO2 conversion during the sampling also occur during normal combustion. This may lead to high NO2 concentrations during the combustion cycle which are then lowered during the expansion to the measured exhaust concentrations.

The formation of particles in the combustion chamber of a direct injection diesel engine has been studied with the use of the Total Cylinder Sampling Method. With this method, nearly the entire contents of the cylinder of an operating diesel engine can be quickly removed at various times during the combustion process. The particle mass and size distributions present in the sample can then be analyzed. If quenching of the combustion process is quick and complete, the resulting samples are representative of the particle mass and size distributions present in the cylinder near the time sampling begins. This paper discusses the effect of injection timing and piston bowl shape on the particle formation and oxidation. Example size distribution measurements are also shown. The particle concentrations in the cylinder were measured for three different injection timings with the standard piston installed in the engine.

Measurements of particle concentrations in one cylinder of a 1982 5.7 liter GM V-8 diesel engine have been made using a unique total cylinder sampling system. The first part of the paper is devoted to an examination of the performance of the sampling system. The role of blowoff and nucleation in the formation of sample artifacts is discussed. The remainder of the paper is devoted to the results of a study of the formation and removal of carbon particles during diesel engine combustion. Several operating conditions have been examined. The influence of injection timing, load, EGR, and oxygen addition on particle formation and removal has been investigated. The concentrations of volatile and nonvolatile particulate matter have been measured as a function of crankangle position. Particle formation begins 1-5 crankangle degrees (CAD) after the start of combustion.