Search Results

Energy conserving performance by engine oils is required even for motorcycles from the viewpoint of environmental issues. The fuel efficiency of passenger car engine oils has been improved through lower viscosity and usage of friction modifiers. However, engine oils containing friction modifiers such as Mo compounds may not be applied to four-stroke motorcycles, because motorcycles normally have a wet clutch system inside the crankcase and such engine oils can decrease the clutch capacity. Therefore, it is important to investigate the effects of oil formulation in order to develop motorcycle engine oils, which can improve fuel efficiency and preserve clutch capacity1)∼2). In this study, fuel efficiency of prototype oils was evaluated with a motorcycle engine motoring tester. In addition, friction coefficients of engine oils formulated with different additives such as dispersants and detergents in clutch system were evaluated with an SAE No. 2 clutch friction tester.

Just as CO2 reduction is required of four wheeled vehicles for environmental protection, similar environmental concerns drive the development of motorcycle oil technology. Zinc dialkyldithiophosphate (Zn-DTP) type additives are widely used for engine oil formulations. However, phosphorus compounds are environmental load materials. The reduction of the quantity of phosphorus compounds in engine oils is required to reduce poisoning of three-way catalysts used to purify exhaust gases from internal combustion engines. Mr. Ito and his co-authors1) reported that they developed a sulfur-based additive as a substitute for Zn-DTP. Their non-phosphorus engine oil formulation for four-wheeled vehicles with a sulfur-based additive was examined to evaluate its anti-wear performance using the following test methods:JASO M328 for gasoline engines (KA24E) and JASO M354 for Diesel engine (4D34T4).

The energy conserving by engine oils has been required from the viewpoint of the environmental issue. The fuel efficiency of passenger car engine oils has been improved by adding friction modifiers. However, engine oils containing friction modifiers can not be applied to 4-stroke motorcycles. Because motorcycles normally have a wet clutch system inside the crankcase and such engine oils can decrease the clutch capacity.1) ∼ 2) Therefore, it is important for motorcycle engines to investigate additives, which can increase friction coefficient on paper-based friction materials. In this study, friction coefficients of engine oils formulated with different additives such as dispersants and detergents were evaluated with a reciprocating friction tester. Several types of polybutenyl succinimides, sulfonates, phenates and salicylates were used as dispersants and detergents.

Engine oils normally contain calcium detergents and ZnDTPs to have detergency and antiwear performance. However, it has been recently understood that these additives could deteriorate filter performance in catalyst and DPF. In this background this paper explains the study and the development about new type of engine oil excluding metal detergents and phosphorus compounds. The developed engine oil shows good durability in several JASO engine tests and a fleet test by formulating newly developed additives as substitute for calcium detergents and ZnDTPs.

The energy conserving by engine oils has been required from the viewpoint of the environmental issue. The fuel consumption efficiency of passenger car engine oils has been improved by adding friction modifiers. However, engine oils containing friction modifiers can cause reduction of the clutch capacity for motorcycle engines. 1)∼2) The higher detergency is occasionally required for motorcycle engines compared with passenger car engines. Therefore, it is important that specially formulated 4-stroke engine oils, which satisfy those requirements, are developed for motorcycles. The clutch capacity of commercially available engine oils for passenger cars was evaluated according to the standard of JASO T904-98. As a result, some engine oils, which have a low clutch friction coefficient, were found. In order to develop a motorcycle engine oil, a basic additive system which has excellent detergency and oxidation stability was selected by evaluating with laboratory tests.

As well as a four-wheeled vehicle, in the field of motorcycle, development of the CO2 reduction technology and practical use are required for global environment. Zinc dialkyldithiophosphate (Zn-DTP) type additives are widely used for engine oil formulations. However, phosphorus compounds are environmental load materials. The reduction of the quantity of phosphorus compounds in engine oils is required to reduce poisoning of three-way catalysts used to purify exhaust gases from internal combustion engines. Ito1) reported that they developed a sulfur-based additive as a substitute for Zn-DTP. Their non-phosphorus engine oil formulation for four-wheeled vehicles with a sulfur-based additive was examined to evaluate its anti-wear performance using the following test methods: JASO M328 for gasoline engines (KA24E) and JASO M354 for Diesel engine (4D34T4).

Two-stroke engines have been normally used for power equipment such as bush cutters and lawn mowers because of their compactness and cost-performance. However, their exhaust smoke is often put in question for causing a poor working environment. Therefore, it is important to develop an environmentally friendly two-stroke engine oil. In this paper, the development of a two-stroke engine oil with low smoke performance and its evaluation results are reported. If dilution ratio of a two-stroke engine oil with gasoline is increased in order to reduce the exhaust smoke, the lubricity becomes poor because of the decrease of base oil ratio in the oil. A two-stroke engine oil that copes with both low exhaust smoke and anti-seizure performance for pistons, has been developed by using a carefully selected polymer ester. The oil showed excellent anti-seizure performance in actual engine tests.