Search Results

Standard

Windshield Washer Tubing

2006-03-03

HISTORICAL

J1037_200603

This SAE Standard covers nonreinforced, extruded, flexible tubing intended primarily for use as fluid lines for automotive windshield washer systems which conform to the requirements of SAE J942.

Standard

Windshield Washer Tubing

2001-08-07

HISTORICAL

J1037_200108

This SAE Standard covers nonreinforced, extruded, flexible tubing intended primarily for use as fluid lines for automotive windshield washer systems which conform to the requirements of SAE J942.

Standard

WINDSHIELD WASHER TUBING

1987-12-01

HISTORICAL

J1037_198712

This SAE Standard covers nonreinforced, extruded, flexible tubing intended primarily for use as fluid lines for automotive windshield washer systems conforming to the requirements of SAE J942.

Standard

Windshield Washer Tubing

2015-04-21

CURRENT

J1037_201504

This SAE Standard covers nonreinforced, extruded, flexible tubing intended primarily for use as fluid lines for automotive windshield washer systems which conform to the requirements of SAE J942.

Standard

Low-Permeation Fuel Fill and Vent Tube

2021-09-14

CURRENT

J2405_202109

This SAE Standard covers the minimum requirements for a low-permeation tubing (100 g/m2/day or less) for use as a low pressure (14.5 kPa) liquid- or vapor-carrying component for use in gasoline or diesel fuel filler, vent, and vapor systems. The construction shall be designed to be functional over a temperature range of -40 to 100 °C for the T1 designation, or -40 to 125 °C for the T2 designation.

Standard

Low-Permeation Fuel Fill and Vent Tube

1997-08-01

HISTORICAL

J2405_199708

This SAE Standard covers the minimum requirements for a low-permeation tubing (100 g/m2·day or less) for use as a low pressure (14.5 kPa) liquid- or vapor-carrying component for use in gasoline or diesel fuel filler, vent, and vapor systems. The construction shall be designed to be functional over a temperature range of –40 °C to 100 °C for the T1 designation, or –40 °C to 125 °C for the T2 designation.

Standard

Low-Permeation Fuel Fill and Vent Tube

2007-07-02

HISTORICAL

J2405_200707

This SAE Standard covers the minimum requirements for a low-permeation tubing (100 g/m2·day or less) for use as a low pressure (14.5 kPa) liquid- or vapor-carrying component for use in gasoline or diesel fuel filler, vent, and vapor systems. The construction shall be designed to be functional over a temperature range of –40 °C to 100 °C for the T1 designation, or –40 °C to 125 °C for the T2 designation.

Standard

Test Method for Evaluating the Electrical Resistance of Coolant System Hose Covers

2021-08-12

CURRENT

J2790_202108

This test method provides a standardized procedure for evaluating the electrical resistance of automotive coolant hose covers. It is known that an electrical potential exists between the engine and the radiator. Coolant hose cover conductivity has been determined to be a factor to reduce hose clamp life when vehicle build variations allow possible contact of the hose or the clamp to metal components on the radiator and engine thus completing an electrical circuit. The ensuing electrical current can undercut the clamp protective coating, leaving it vulnerable to the corrosive effects of road salts, moisture, and other environmental contaminants. SAE Recommended Practice J1684 addresses the electrochemical resistance of the tube portion of the coolant hose.

Standard

Test Method for Evaluating the Electrical Resistance of Coolant System Hose Covers

2010-02-15

HISTORICAL

J2790_201002

This test method provides a standardized procedure for evaluating the electrical resistance of automotive coolant hose covers. It is known that an electrical potential exists between the engine and the radiator. Coolant hose cover conductivity has been determined to be a factor to reduce hose clamp life when vehicle build variations allow possible contact of the hose or the clamp to metal components on the radiator and engine thus completing an electrical circuit. The ensuing electrical current can undercut the clamp protective coating, leaving it vulnerable to the corrosive effects of road salts, moisture, and other environmental contaminants. SAE Recommended Practice J1684 addresses the electrochemical resistance of the tube portion of the coolant hose.

Standard

Test Method for Evaluating the Electrical Resistance of Coolant System Hose Covers

2007-06-15

HISTORICAL

J2790_200706

This test method provides a standardized procedure for evaluating the electrical resistance of automotive coolant hose covers. It is known that an electrical potential exists between the engine and the radiator. Coolant hose cover conductivity has been determined to be a factor to reduce hose clamp life when vehicle build variations allow possible contact of the hose or the clamp to metal components on the radiator and engine thus completing an electrical circuit. The ensuing electrical current can undercut the clamp protective coating, leaving it vulnerable to the corrosive effects of road salts, moisture, and other environmental contaminants. SAE Recommended Practice J1684 addresses the electrochemical resistance of the tube portion of the coolant hose.

Standard

General Requirement for Preformed Hoses for Air Induction on Heavy-Duty Engines

2000-07-05

HISTORICAL

J2140_200007

This SAE Standard outlines the requirements for a preformed thermosetting hose intended for use in heavy-duty vehicle engines, such as air cleaner to carburetor hose, where it is exposed to normal heat and splash of motor oil.

Standard

General Requirement for Preformed Hoses for Air Induction on Heavy-Duty Engines

2005-09-12

HISTORICAL

J2140_200509

This SAE Standard outlines the requirements for a preformed thermosetting hose intended for use in heavy-duty vehicle engines, such as air cleaner to carburetor hose, where it is exposed to normal heat and splash of motor oil.

Standard

General Requirement for Preformed Hoses for Air Induction on Heavy-Duty Engines

2014-06-04

CURRENT

J2140_201406

This SAE Standard outlines the requirements for a preformed thermosetting hose intended for use in heavy-duty vehicle engines, such as air cleaner to carburetor hose, where it is exposed to normal heat and splash of motor oil.

Standard

General Requirement for Preformed Hoses for Air Induction on Heavy-Duty Engines

2020-01-29

WIP

J2140

This SAE Standard outlines the requirements for a preformed thermosetting hose intended for use in heavy-duty vehicle engines, such as air cleaner to carburetor hose, where it is exposed to normal heat and splash of motor oil.

Standard

FUEL AND OIL HOSES

1981-09-01

HISTORICAL

J30_198109

This specification covers three types of fuel and oil hose, coupled and uncoupled, for use with gasoline oil and diesel fuel.

Standard

FUEL AND OIL HOSES

1963-06-01

HISTORICAL

J30_196306

This specification covers one type and one style of fuel and oil hose, coupled and uncoupled, for use with gasoline, oil, or diesel fuel.

Standard

FUEL AND OIL HOSES

1961-06-01

HISTORICAL

J30_196106

This specification covers one type and one style of fuel and oil hose, coupled and uncoupled, for use with gasoline, oil, or diesel fuel.

Standard

FUEL AND OIL HOSES

1977-02-01

HISTORICAL

J30D_197702

This specification covers hose which may be supplied either coupled or uncoupled for use with gasoline, diesel fuel, lubricating oil, or the vapor present in either the fuel system or in the crankcase of internal combustion engines in mobile, stationary, and marine applications. The hose may be furnished in long lengths, specific cut lengths, or as a part preformed to a specific configuration.

Standard

FUEL AND OIL HOSES

1976-03-01

HISTORICAL

J30C_197603

This specification covers hose which may be supplied either coupled or uncoupled for use with gasoline, diesel fuel, lubricating oil, or the vapor present in either the fuel system or in the crankcase of internal combustion engines in mobile, stationary, and marine applications. The hose may be furnished in long lengths, specific cut lengths, or as a part preformed to a specific configuration.

Standard

AUTOMOTIVE AIR CONDITIONING HOSE

1988-07-01

HISTORICAL

J51_198807

This specification covers reinforced rubber and reinforced thermoplastic hose, or hose assemblies, intended for conducting liquid and gaseous dichlorodifluoromethane (refrigerant 12) in automotive air conditioning systems. The hose shall be designed to minimize permeation of refrigerant 12 and contamination of the system and to be serviceable over a temperature range of -30 to 120°C (-22 to 248°F). Specific construction details are to be agreed upon between user and supplier.