Search Results

The rapid expansion of the market for remotely piloted aircraft (RPA) includes a particular interest in 10-25 kg vehicles for monitoring, surveillance, and reconnaissance. Power-plant options for these aircraft are often 10-100 cm3 internal combustion engines. Both power and fuel conversion efficiency decrease with increasing rapidity in the aforementioned size range. Fuel conversion efficiency decreases from ∼30% for conventional-scale engines (>100 cm3 displacement) to <5% for micro glow-fuel engines (<10 cm3 displacement), while brake mean effective pressure decreases from >10 bar (>100 cm3) to <4 bar (<10 cm3). Based on research documented in the literature, the losses responsible for the increase in the rate of decreasing performance cannot be clearly defined. Energy balances consisting of five pathways were experimentally determined on two engines that are representative of Group-2 RPA propulsion systems and compared to those in the literature for larger and smaller engines.

As IC engines decrease in displacement, their cylinder surface area to swept volume ratio increases. Examining power output of IC engines with respect to cylinder surface area to swept volume ratio shows that there is a change in power scaling trends at approximately 1.5 cm−1. At this size, it is suggested that heat transfer from the cylinder becomes the dominant thermal loss mechanism and performance and efficiency characteristics suffer. Furthermore, small IC engines (>1 cm−1) have limited technical performance data compared to IC engines in larger size classes. Therefore, it is critical to establish accurate performance figures for a family of geometrically similar engines in the size class of approximately 1.5 cm−1 in order to better understand the thermal losses that contribute to lower efficiencies in small IC engines. The engines considered in this scaling study were manufactured by 3W Modellmotoren, GmbH.

Loss mechanisms in 1-10 kW spark-ignition, two-stroke engines may be grouped into five categories: thermal losses, frictional losses, sensible enthalpy in the exhaust gases, incomplete combustion, and short-circuiting of fresh fuel and air mixture. These loss mechanisms cause small two-stroke engines to have fuel conversion efficiencies 50%-70% lower than similar larger engines. Previous studies of loss scaling in small engines have estimated the short-circuiting using heuristics derived for larger engines or grouped it with other combustion losses to complete the energy balance. This work describes and compares two methods for measuring short-circuiting on a commercially available, two-stroke, naturally aspirated, spark ignition engine with 55 cm3 displacement. One method used oxygen as an analyte (the Watson method), nitrogen as an internal standard, and gas chromatography with a thermal conductivity detector for quantification.