Criteria

Text:
Topic:
Display:

Results

Viewing 1 to 22 of 22
HISTORICAL
1994-06-10
Standard
J1717_199406
SAE J1717 is an advisory document suggesting minimum recommended testing, appearance evaluation, and protocol for specifying the recommendations with regard to Singular Unassembled Automotive interior trim Parts. The purpose of this SAE Recommended Practice is to: a. standardize the testing and appearance evaluation requirements for interior unassembled plastic parts for the automotive industry; b. standardize the associated test and appearance evaluation methods; and c. Provide a method for specifying these requirements by the use of a simple line call-out designation.
CURRENT
2017-07-13
Standard
J1717_201707
SAE J1717 is an advisory document suggesting minimum recommended testing, appearance evaluation, and protocol for specifying the recommendations with regard to Singular Unassembled Automotive Interior Trim Parts.
HISTORICAL
2007-11-05
Standard
J1717_200711
SAE J1717 is an advisory document suggesting minimum recommended testing, appearance evaluation, and protocol for specifying the recommendations with regard to Singular Unassembled Automotive Interior Trim Parts.
CURRENT
2005-03-07
Standard
J1685_200503
This SAE Recommended Practice provides a system for classification and specification for limited number of acrylonitrile/butadiene/styrene (ABS) and blends with polycarbonate (ABS+PC) plastics used in the Automotive Industry. Based upon ASTM D 4673, Classification System for (ABS) Molding Materials, it calls for additional descriptive characteristics and properties commonly used in the Automotive Industry. This practice applies to natural, non-color matched black, and plating gray compounds only. Color matched compounds shall be defined by the proprietary OEM standards. This practice allows for the use of recycled, reconstituted, and regrind materials provided that the requirements as stated in this document are met, the material has not been altered or modified to change its suitability for safe processing and use, and the material shall be identified as such.
HISTORICAL
1995-05-01
Standard
J1685_199505
This SAE Recommended Practice provides a system for classification and specification for limited number of acrylonitrile/butadiene/styrene (ABS) and blends with polycarbonate (ABS+PC) plastics used in the Automotive Industry. Based upon ASTM D 4673, Classification System for (ABS) Molding Materials, it calls for additional descriptive characteristics and properties commonly used in the Automotive Industry. This practice applies to natural, non-color matched black, and plating gray compounds only. Color matched compounds shall be defined by the proprietary OEM standards. This practice allows for the use of recycled, reconstituted, and regrind materials provided that the requirements as stated in this document are met, the material has not been altered or modified to change its suitability for safe processing and use, and the material shall be identified as such.
HISTORICAL
1993-03-01
Standard
J1639_199303
This SAE Recommended Practice provides a system for classification and specification for limited number of polyamides (nylons) used in the Automotive Industry. Based upon ASTM D 4066, Classification System for Nylon Injection and Extrusion Materials (PA), it calls for additional descriptive characteristics and properties commonly used in the Automotive Industry. This document applies to natural and non-color matched black, heat-stabilized polyamide compounds only. Color matched compounds shall be defined by the proprietary OEM standards. This document allows for the use of recycled, reconstituted, and regrind materials provided that the requirements as stated in this document are met, the material has not been altered or modified to change its suitability for safe processing and use, and the material shall be identified as such.
HISTORICAL
1995-05-01
Standard
J1639_199505
This SAE Recommended Practice provides a system for classification and specification for limited number of polyamides (nylons) used in the Automotive Industry. Based upon ASTM D 4066, Classification System for Nylon Injection and Extrusion Materials (PA), it calls for additional descriptive characteristics and properties commonly used in the Automotive Industry. This document applies to natural and non-color matched black, heat-stabilized polyamide compounds only. Color matched compounds shall be defined by the proprietary OEM standards. This document allows for the use of recycled, reconstituted, and regrind materials provided that the requirements as stated in this document are met, the material has not been altered or modified to change its suitability for safe processing and use, and the material shall be identified as such.
CURRENT
2017-03-28
Standard
J1639_201703
This SAE Recommended Practice provides a system for classification and specification for limited number of polyamides (nylons) used in the Automotive Industry. Based upon ASTM D 4066, Classification System for Nylon Injection and Extrusion Materials (PA), it calls for additional descriptive characteristics and properties commonly used in the Automotive Industry. This document applies to natural and non-color matched black, heat-stabilized polyamide compounds only. Color matched compounds shall be defined by the proprietary OEM standards. This document allows for the use of recycled, reconstituted, and regrind materials provided that the requirements as stated in this document are met, the material has not been altered or modified to change its suitability for safe processing and use, and the material shall be identified as such.
HISTORICAL
1997-07-01
Standard
J1344_199707
This SAE Recommended Practice provides a system for marking plastic parts to designate the type of material from which the part was fabricated.
HISTORICAL
1995-06-01
Standard
J1344_199506
This SAE Recommended Practice provides a system for marking plastic parts to designate the type of material from which the part was fabricated. The purpose of this document is to provide information to facilitate the: a.) Selection of materials and procedures for repairing and repainting plastic parts, and b.) Collection and handling of parts for subsequent recycling.
HISTORICAL
1982-02-01
Standard
J1345_198202
CURRENT
2017-03-28
Standard
J1344_201703
This SAE Recommended Practice provides a system for marking plastic parts to designate the type of material from which the part was fabricated.
CURRENT
1995-05-01
Standard
J1345_199505
HISTORICAL
1989-06-01
Standard
J2016_198906
This recommended practice provides a screening procedure for evaluating the susceptibility of plastics to environmental stress cracking by testing their resistance to pure solvents. This method can then be used to evaluate complex chemical mixtures with components identified as suspect, which are expected to be present in the polymer's environment. It is recommended that ASTM D 543, Resistance of Plastics to Chemical Reagents, also be conducted. This test evaluates chemical effects that can cause changes in polymer weight, dimension, appearance or strength.
CURRENT
2017-07-12
Standard
J2253_201707
This SAE Standard is intended to serve as a guide for the collection of physical, mechanical, and thermal properties of fiber-reinforced polymer composite materials for automotive structural applications. This document attempts to utilize test methods applicable to the widest range of structural materials and processes without compromising the integrity of the data being sought. A summary of the material characterization is shown in Section 15.
HISTORICAL
1995-12-01
Standard
J2253_199512
This SAE Standard is intended to serve as a guide for the collection of physical, mechanical, and thermal properties of fiber-reinforced polymer composite materials for automotive structural applications. This document attempts to utilize test methods applicable to the widest range of structural materials and processes without compromising the integrity of the data being sought. A summary of the material characterization is shown in Section 15.
HISTORICAL
1999-11-29
Standard
J2016_199911
This SAE Recommended Practice provides a screening procedure for evaluating the susceptibility of plastics to environmental stress cracking by testing their resistance to pure solvents or their mixtures. This method can be used to evaluate effect of complex chemical mixtures with unknown or suspect components, which may be encountered in the polymer's environment. The list of chemicals in Appendix A is intended only to serve as a guide and does not exclude any chemical that may represent the environment the polymer is subjected to in a specific application. As specific environment and exposure conditions are application dependent and could vary significantly from one application to another, the user of the document is recommended to choose the appropriate solvents relevant to the actual application enviroment and is not under any obligation to test the effect of all the chemicals listed in Appendix A.
CURRENT
2008-02-08
Standard
J2016_200802
This SAE Recommended Practice provides a screening procedure for evaluating the susceptibility of plastics to environmental stress cracking by testing their resistance to pure solvents or their mixtures. This method can be used to evaluate effect of complex chemical mixtures with unknown or suspect components, which may be encountered in the polymer's environment. The list of chemicals in Appendix A is intended only to serve as a guide and does not exclude any chemical that may represent the environment the polymer is subjected to in a specific application. As specific environment and exposure conditions are application dependent and could vary significantly from one application to another, the user of the document is recommended to choose the appropriate solvents relevant to the actual application enviroment and is not under any obligation to test the effect of all the chemicals listed in Appendix A.
CURRENT
2017-07-12
Standard
J2642_201707
This SAE Recommended Practice is intended to establish uniform procedures for developing specifications for automotive thermoplastics. It is intended for use by automotive companies and their suppliers of molded and/ or fabricated parts from thermoplastic materials.
HISTORICAL
2004-01-13
Standard
J2642_200401
This SAE Recommended Practice is intended to establish uniform procedures for developing specifications for automotive thermoplastics. It is intended for use by automotive companies and their suppliers of molded and/ or fabricated parts from thermoplastic materials.
HISTORICAL
2008-11-26
Standard
J2749_200811
CURRENT
2017-07-13
Standard
J2749_201707
Viewing 1 to 22 of 22