Search Results

Head-to-knee interaction of the right front passenger dummy can occur in some 30-35 MPH crash barrier tests. The biofidelity and significance of these interactions as related to predicting human response was addressed in this study. In a series of laboratory experiments an instrumented headform was dropped on the dummy knee to simulate the barrier interactions. These test results were then related to the human by dropping the same headform on the cadaver leg. The instrumented headform was dropped from three heights to impact the Part 572 dummy knee at three velocities. Two impact sites and two impact angles were used. These test parameters bracketed the barrier conditions. Measurements from headform accelerometers permitted calculation of HIC value for comparison to barrier values. Comparable experiments were subsequently performed with three unembalmed cadaver subjects using the same headform and test procedures.

Knee bolsters on the lower instrument panel have been designed to control occupant kinematics during sudden deceleration. However, a wide variability in car occupant anthropometry and choice of seating posture indicates that lower-extremity contacts with the impingement bolster could predominantly load the flexed leg through the knee (acting through the femur) or through the tibia (acting through the knee joint). Potential injuries associated with these types of primary loading may vary significantly and an understanding of potential trauma mechanisms is important for proper occupant restraint.

National Accident Sampling System (NASS) data, for the years 1993-1995, suggests a high frequency of tibiofemoral joint fractures among automotive accident victims. In addition, the NASS data also suggests that these injuries may be attributable to direct axial loading via the floor pan and/or the foot controls. Hirsch and Sullivan (1965), and Kennedy and Bailey (1968) conducted quasi-static fracture experiments axially compressing human tibiofemoral joints at low rates of loading and low angles of flexion. Hirsch and Sullivan observed a mean fracture load of approximately 8 kN compared to approximately 16 kN in the Kennedy and Bailey study. The current tibiofemoral joint injury criterion used in anthropomorphic dummies is based on Hrisch and Sullivan''s data. The current study involved impact experiments on human tibiofemoral joints (aged 71.4±11.2) directed in a superior direction along the axis of the tibia with the joint flexed 90°.