Search Results

A simple ADAMS model was developed for simulating one possible mechanism that causes low-frequency (less than 1 kHz) noise in disc brake assemblies for heavy-duty and medium-duty trucks. The model consists of: truck tire, axle housing, torque plate, caliper, push rods, inner pad, outer pad, and rotor. Only one component (the torque plate) was modeled as a flexible body (using a finite element model), while all other parts are considered as infinitely rigid. A lumped parameter representing the suspension wrap-up stiffness resists the axle pitch motion. When the brakes are not engaged, the system has two distinct modes of vibration, namely, the axle pitch mode which is governed by the suspension wrap-up stiffness, and the caliper transverse (side-to-side) mode, which is governed by the stiffness of the torque plate (out-of-plane deflection of the torque plate) and by the suspension lateral stiffness.

The uniqueness of heavy and medium duty vehicle powertrain design, compared to that of passenger cars, is two fold: vast variations exist from vehicle to vehicle because of mission requirements, and powertrain components are sourced from a diverse group of suppliers. Vehicle powertrain design involves selection of the appropriate major components, such as the engine, clutch, transmission, driveline, and axle. At this design stage the main focus is on power matching, to ensure that the vehicle's performance meets specifications of gradability, maximum speed, acceleration, fuel economy, and emissions[1, 2, 3, 4 and 5]. The general practice also demands that the durability of the drivetrain components for the intended vocation or application be verified. Equally important but often neglected in the design phase is the system's NVH (Noise Vibration and Harshness) performance, such as torsional vibration, U-joint excitation, and gear rattle.

Conducting effective drivetrain NVH (Noise, Vibration and Harshness) troubleshooting is difficult because its execution requires commanding knowledge and experience on complicated vehicle system interactions. This is especially true for commercial vehicles due to the wide variety of available powertrain and chassis configurations and broad spectrum of vehicle applications. Furthermore, access to revenue producing commercial vehicles is often limited. Problem solving must be carried out within a tight schedule. Under these circumstances, a practical drivetrain NVH troubleshooting guide will come in handy. The objective of this paper is to document the “know-how” we have learned. Subjects covered in the discussions are underlying physics, problem diagnosis, solutions, and problem avoidance.

To validate the integrity of a commercial vehicle's exhaust system's structural design is a challenging job. An integrated approach to use both simulation/modeling and hardware testing must be employed to reduce product development cost. In addition to the considerations of the geometry and configuration specs of 70-90 parts and joints as well as material's thermal and mechanical property data in model development, representative loading must be used. For base excitation type of loading, such as the one experienced by the vehicle's exhaust system, one must decide whether to conduct the time domain transient analysis or frequency domain random vibration analysis. Although both methods are well known, few discussions can be found in the literature regarding their effective use in the framework of product design and development. Based on our study, the random vibration method should be used first for identifying high stress locations in the system and for design optimization.

Powertrain torsional vibration has become a subject of increasing concern for the heavy duty truck industry in recent years. This is due in part to truck and diesel engine developments, and to drivetrain system trends. A computer simulation is an effective tool in analyzing this problem. A powertrain vibration analysis program has been developed by the authors. It has been used extensively in the evaluation and optimization of powertrain system performance. In this paper, first the heavy duty powertrain is characterized as a vibrating system. Its natural frequencies, mode shapes and frequency response characteristics are reviewed. Second, the theory of torsional vibration and its application in the simulation are described. The drivetrain is described as a discreet model. An undamped modal analysis is given as an eigenvalue problem.

Automotive transmission design quality is generally judged by the vehicle's performance. Its acceleration, gradeability, maximum speed, terminal speeds, fuel economy and emissions provide these measures. These performance characteristics are optimized through the design process. This process, however, is iterative in nature and requires informed decision making to produce a design that is cost effective and excels in quality. In modern engineering, computer simulation plays an important role in the product design and development process. This paper provides a case study of the design and analysis of a heavy truck automatic transmission. It demonstrates the use of computer simulation models in generating and evaluating innovative design ideas.

In recent years, several transit agencies have tested buses equipped with hybrid powertrain systems. It has been reported that hybrid powertrains have significant advantages over conventional diesel engine systems, in the area of emissions and fuel economy performance. Presented in this paper are engineering issues and suggestions from an auto component supplier point of view in the design of such a powertrain system. The particular system being considered consists of a downsized diesel engine, a generator, a battery package, two identical AC induction motors, and gearbox systems for the left and right driven wheels. The assembly is supported by an H-shaped suspension sub-structure uniquely designed to achieve the “ultra-low floor” configuration. Our discussion covers the system performance, as well as the durability issues. In particular, the presentation focuses on the durability and the design layout of the gearbox and suspension substructure.

The uniqueness and challenge of heavy and medium duty vehicle manufacturing is that the vehicle&s subsystems and major components are procured from different suppliers. As a consequence, engineering task coordination for total vehicle performance optimization is required even if the intended design modification is only on one component. In the case of suspension design, related subsystems such as the drive axle, driveline, brake system, steering system, and engine mounts should all be included for review. The related potential problems for study fall into three categories, namely: function, durability, and NVH. The effective approach in addressing all these issues early in the design stage is through computer modeling and dynamic system simulation of the suspension system and related subsystems.

Contact stress analysis or surface fatigue life prediction is a subject frequently encountered in powertrain component designs. Examples are the design of gears, bearings, cams, and load ramps. In many cases, design evaluations rely on simple analysis, component supplier's suggestions, and prototype testing. One viable technology trend in modern engineering, however, is to use computer simulation and analysis as a design guide. It is universally acknowledged that up-front computer-aided-engineering (CAE) will reduce the product development cycle time and cost, and improve product quality. In addition, this approach provides a good platform for technology growth. Scattered examples on surface durability analytical modeling techniques are available in the literature. But, the most suitable engineering tools for routine product design support are yet to be developed. Currently, a semi-empirical approach is widely used in the industry.

Since 1983 the Torsen® differential has been employed in the powertrain of more than two-dozen sedans, SUVs, and military vehicles. This differential device is renowned for its unique high torque bias capacity. Torque bias has long been recognized as a desirable drivetrain characteristic that enhances both a vehicle's drivability and stability. Since the generation of torque bias relies on friction, the know-how in achieving balanced design of torque bias and efficiency is crucial. Presented in this paper is an analytical evaluation of the performance of Torsen differential with respect to these parameters. The mathematical model provides effective guidance in design optimization. The performance predictions were found to correlate well with experimentally measured data. In an effort to explore the theory behind the Torsen differential design, the general subject of speed differentiation and torque bias generation is reviewed.