Search Results

Sudden tire deflation, or blow-out, is sometimes cited as the cause of a crash. Safety researchers have previously attempted to study the loss of vehicle control resulting from a blow-out with some success using computer simulation. However, the simplified models used in these studies did little to expose the true transient nature of the handling problem created by a blown tire. New developments in vehicle simulation technology have made possible the detailed analysis of transient vehicle behavior during and after a blow-out. This paper presents the results of an experimental blow-out study with a comparison to computer simulations. In the experiments, a vehicle was driven under steady state conditions and a blow-out was induced at the right rear tire. Various driver steering and braking inputs were attempted, and the vehicle response was recorded. These events were then simulated using EDVSM. A comparison between experimental and simulated results is presented.

When an automobile is driven on wet roads, its tires must remove water from between the tread and road surfaces. It is well known that the ability of a tire to remove water depends heavily on tread depth, water depth and speed, as well as other factors, such as tire load, air pressure and tread design. It is less well known that tire tread depth combined with placement can have an adverse effect on vehicle handling on wet roads. This paper investigates passenger car handling on wet roads. Flat bed tire testing, three-dimensional computer simulation and skid pad experimental testing are used to determine how handling is affected by tire tread depth and front/rear position of low-tread-depth tires on the vehicle. Some skid pad test results are given, along with corresponding simulations. A literature review also is presented. Significant changes in tire-road longitudinal and lateral friction are shown to occur as speed, tread depth and water depth vary, even before hydroplaning occurs.