Search Results

Titanium alloys parts are ideally suited for advanced aerospace systems because of their unique combination of high specific strength at both room temperature and moderately elevated temperature, in addition to excellent general corrosion resistance. Despite these attractive features, use of titanium alloys in engines and airframes is limited by cost. The alloys processing by powder metallurgy eases the obtainment of parts with complex geometry and probably, cheaper. In this work, results of the Ti-6A1-4V, Ti-6Al-7Nb and Ti-13Nb-13Zr alloys production are presented. Samples were produced by mixing of initial metallic powders followed by uniaxial and cold isostatic pressing with subsequent densification by sintering at 1500 C, in vacuum. Sintered samples were characterized for phase composition, microstructure and microhardness by X-ray diffraction, scanning electron microscopy and Vickers indentation, respectively. Density was measured by Archimedes method.

Titanium alloys parts are ideally suited for advanced aerospace systems because of their unique combination of high specific strength and superior resistance to many corrosive environments, in addition to excellent composite compatibility. Despite these features, use of titanium alloys in engines and airframes is limited by cost. Therefore, the improvement of processing techniques for titanium alloys production became a trend of the modern metallurgic technology. This work presents results of the microstructural development of Ti-6Al-2Sn-4Zr-2Mo alloy produced by arc melting and powder metallurgy processes. This alloy has important applications in aerospace area, in sections exposed to high temperatures. Samples of this alloy were characterized by SEM (scanning electron microscopy), XRD (X-ray diffraction), Vickers microhardness measurements and density.

In the aerospace industry, 80-90% of the titanium used in airframes has been from Ti-6Al-4V. This alloy is used throughout the section of an aircraft - fuselage, nacelles, landing gear, wing and empennage. In gas turbine engines Ti-6Al-4V is used in static and rotating components. Castings are used for the manufacture of more complex static components; forgings are typically used for moving parts. Conventional methods for obtaining titanium alloys require special conditions of controlled atmosphere that culminates in a high production cost. In this paper it was investigated the peculiarities of the typical microstructure of Ti-6Al-4V produced by powder metallurgy using TiH₂ powder. Samples were produced from the initial mixture of Al, V and TiH₂ powders, followed by cold uniaxial and isostatic pressing with subsequent densification by sintering in temperatures between 800-1400°C, in vacuum.

Titanium alloys parts are ideally suited for advanced aerospace systems because of their unique combination of high specific strength at both room temperature and moderately elevated temperature, in addition to excellent corrosion resistance. Despite these features, use of titanium alloys in engines and airframes is limited by cost. The alloys processing by powder metallurgy (P/M) eases the obtainment of parts with complex geometry. In this work, results of the Ti-6Al-4V alloys production are presented. Samples were produced by mixing of initial metallic powders followed by uniaxial and cold isostatic pressing with subsequent densification by sintering between 900 up to 1500 °C, in vacuum. Sintered samples were characterized for phase composition, microstructure and microhardness by X-ray diffraction, scanning electron microscopy and Vickers indentation, respectively.