Search Results

This paper starts with an analysis of design configurations of the drivelines with different power-dividing units (PDUs) of main dump truck manufacturing companies. As it follows from the analysis, improvements of articulated truck energy efficiency and reduction of fuel consumption by optimizing the power distribution to the drive wheels are still open issues. The problem is that a variety of operating and terrain conditions of dump trucks requires different wheel power distributions that cannot be provided by one set of PDUs employed in a truck. The central PDU in the transfer case was identified as the most important PDU among the five PDUs, which plays a crucial role in the power distribution between the front axle and the rear tandem of a 6×6 articulated dump truck. The paper formulates a constraint optimization problem to minimize the tire slippage power losses by optimizing the power distribution between the drive wheels.

This paper presents an analysis of coupled longitudinal and lateral dynamics of a 4×4 hybrid-electric off-road vehicle (HEV) with two passive driveline systems, including drivelines with (i) an interaxle open symmetrical differential in the transfer case and (ii) a locked transfer case, i.e., positive engagement of two axles. The axle differentials are open. As the study proved, lateral dynamics of the 4×4 HEV, characterized by the tire side forces, vehicle lateral acceleration, yaw rate and tire gripping factors can be impacted by the tire longitudinal forces, whose magnitudes and directions (positive-negative) strongly depend on the driveline characteristics. At the same time, the tire side forces impact the relation between the longitudinal forces and tire slippages.

Normal and longitudinal dynamics of vehicles interrelates via the normal and longitudinal tire reactions. The normal reactions are supposed to be formed by characteristics of the suspension system and tires, and the longitudinal forces in the tire patches are produced by the driveline system by supplying torques to the drive wheels. Usually, the normal and longitudinal reactions, independently generated by the two vehicle systems, are considered to interrelate, but not to impact each other. An analytical study presented in this paper showed that the normal tire reactions are formed not only by the design of suspension but also by the longitudinal tire reactions (circumferential wheel forces), which follow from the wheel torques supplied by the driveline system. A 6×6 vehicle with A-type suspension systems at all three axles exhibits different normal tire reactions at the drive axles during motion even when the static weight distribution is equal.

Brake-based traction control systems (TC), which utilize the brake of a spinning wheel of the drive axle, are widely used in passenger cars and light trucks, and recently were applied to all-wheel drive construction equipment. Such machines employ various types of interwheel drive systems (i.e., axle drives such as open differentials, limited slip differentials, etc.) to control torque split between the drive wheels and, thus, improve vehicle traction performance. As experimental research showed, the interaction between the traction control system and the axle drive can lead to unpredictable changes in vehicle performance. Lack of analytical work in this area motivated this study of the interaction and impact of the two systems on each other and the dynamics and performance of a drive axle.

All-wheel drive (AWD) vehicle performance considerably depends not only on total power amount needed for the vehicle motion in the given road/off-road conditions but also on the total power distribution among the drive wheels. In turn, this distribution is largely determined by the driveline system and its mechanisms installed in power dividing units. They are interwheel, interaxle reduction gears, and transfer cases. The paper presents analytical methods to evaluate the energy and, accordingly, fuel efficiency of vehicles with any arbitrary number of the drive wheels. The methods are based on vehicle power balance equations analysis and give formulas that functionally link the wheel circumferential forces with slip coefficients and other forces acting onto an AWD vehicle. The proposed methods take into consideration operational modes of vehicles that are tractive mode, load transportation, or a combination of both.

To develop better performing vehicles, for ground transportation, it is necessary to improve the theory in vehicle dynamics for choosing suitable mass and geometric parameters for highway as well as for off road trucks. A new approach is required for choosing such optimal mass and geometric parameters. The present paper is devoted to this problem. A new method for synthesis of mass and geometric parameters is introduced here. The method allows us to synthesize the parameters in such way as to provide a vehicle with the best transport efficiency under various road surface conditions. Constraints such as limitations on these parameters, vehicle running modes, mass and geometric parameters are included in the model. Furthermore other constraints for vehicle running abilities which are dependent on mass and geometric parameters, as well as an algorithm for synthesizing mass and geometric parameters are also included in the paper for pre-optimization process.