Search Results

New emissions regulations of light-duty vehicles (China 6) will be implemented in China from July 1, 2020. This standard includes two stages, China 6a and China 6(b), in which the PM limits of 4.5 mg/km and 3.0 mg/km are introduced respectively; the PN limit is set to be 6×1011 #/km for both stages. The WLTC testing cycle will be implemented in China 6 regulation as well. In this study a light-duty vehicle satisfying China 6(b) emission standards was developed by improving the engine raw emissions, optimizing the calibration and adding a coated GPF to the after-treatment system. The impacts of ash content and consumption of engine oil and the fast ash accumulation to vehicle emissions and backpressure were analyzed through dynamometer testing. The vehicle after-treatment system was then designed and developed to meet China 6(b) emission standards. The characteristics of soot accumulated through mimicking routine driving under cold environments were tested.

Under China’s “3060” target of carbon peak and carbon neutrality, heavy commercial vehicles are a key breakthrough point to promote the automobile industry to achieve carbon peaking and carbon neutrality goals. Green methanol, as a clean alternative fuel, are an effective technical route for heavy commercial vehicles to achieve energy conservation and emission reduction. Based on a 13L methanol engine, this study fully considers the methanol combustion characteristics, the ω shape combustion system of the base engine is redesigned as a pent-roof combustion chamber. The intake port is changed from a swirl port to a high-tumble port, and the piston crown is also adjusted adaptively. At the same time, the cam profile, cooling water jacket, intake and exhaust system are redesigned, and the turbocharger is re-matched according to the physical properties of methanol. CAE tools and means are used to optimize and determine the design proposal.