Search Results

The Honda Accord is the world's first automobile meeting the SULEV category criteria in the LEV-II exhaust emissions standards. An improved accuracy engine control system and catalyst account for the automobile's extremely low emissions. The accuracy engine control system includes double adaptive air-fuel ratio feedback loops composed of STR (Self-Tuning Regulator), for primary air-fuel ratio control, and PRISM (Prediction and Identification Sliding Mode Control), for secondary O2 feedback. The basic algorithm of the latter was presented at SAE 20001). However, two issues required further PRISM algorithm improvements in order to apply the double adaptive loops to an actual vehicle. One such achievement is both the compensation for engine dynamic characteristics by PRISM and the avoidance of the reciprocal interference with two adaptive loops.

Recently, much research has been carried out on secondary O2 feedback which performs control based on the output from a secondary O2 sensor (HEGO sensor). In this research it has been found that, regardless of catalyst aging conditions, the HEGO sensor output indicates 0.6 V when the catalyst reduction rate is maintained at the optimum level. Therefore, based on this relationship, we designed an accurate secondary O2 feedback with the aim of reducing emissions by stabilizing the HEGO sensor output to 0.6 V. In order to realize this control, it was necessary to solve the three problems of nonlinear catalyst characteristics, dead time characteristics, and changes in dynamic characteristics due to catalyst aging conditions. Therefore, these problems were solved using the modeling approach of robust control and a new robust adaptive control named Prediction and Identification Type Sliding Mode Control.

Early activation of catalyst by quickly raising the temperature of the catalyst is effective in reducing exhaust gas during cold starts. One such technique of early activation of the catalyst by raising the exhaust temperature through substantial retardation of the ignition timing is well known. The present research focuses on the realization of quick warm-up of the catalyst by using a method in which the engine is fed with a large volume of air by feedforward control and the engine speed is controlled by retarding the ignition timing. In addition, an intake air flow control method that comprises a flow rate correction using an adaptive sliding mode controller and learning of flow rate correction coefficient has been devised to prevent control degradation because of variation in the flow rate or aging of the air device. The paper describes the methods and techniques involed in the implementation of a quick warm-up system with improved adaptability.