Search Results

In this study, we evaluated NOx production rates of diesel combustions occurred in a constant volume chamber of a rapid compression machine in order to investigate relationship between flame behaviors and NOx emissions. A total gas sampling device was used to measure the NOx concentration in total gases existing in the chamber at a designated time. An EINOx (Emission Index of NOx) production rate was evaluated on the time history of NOx concentration. Temporal temperature distributions in the chamber were measured with a high speed 2-color thermometry. Gas oil (JIS #2) was used as the fuel. The EINOx production rate increases with increasing injection pressure through temperature rises in flames due to enhanced mixing of fuel vapor with ambient air. An increase in the ambient pressure causes overlaps between flames formed around the nozzle, which reduces the flame temperature.

The aim of this study is to clarify the mixture formation in the combustion chamber of our developed natural gas engine incorporating the sub-chamber injection system, in which natural gas is directly injected into a combustion sub-chamber in order to completely separate rich mixture in the sub-chamber, suitable for ignition, from ultra-lean mixture in the main chamber. Mixture distributions in chambers with and without sub-chamber were numerically simulated at a variety of operating conditions. The commercial software of Fluent 16.0 was used to conduct simulations based on Reynolds averaged Navier-Stokes equations in an axial 2 dimensional numerical domain considering movements of piston. Non-reactive flow in the combustion chamber was simulated before the ignition timing at an engine speed of 2000 rpm. The turbulence model employed here is standard k-ε model. Air-fuel ratio is set with a lean condition of 30.

It is well known that indirect injection (IDI) diesel engines have better exhaust performance but lower fuel economy than direct-injection (DI) diesel engines. In recent years, fuel efficiency has been strongly demanded to reduce global warming. Therefore, the IDI engine is required to reduce fuel consumption. According to past research, fuel injection control can be one of the means to improve fuel efficiency in the IDI system. This paper tried to apply two-stage fuel injection as one of the fuel injection control methods to improve fuel efficiency while suppressing exhaust emissions. Particularly, since it is considered necessary to reduce the amount of injection during the ignition delay period in the sub-chamber with the IDI type, two-stage injection with a small amount of pilot injection was applied.

This study tries to reduce SOF (Soluble Organic Fraction) emissions at low load by improving spray characteristics of rape-seed oil and avoiding wall-impingement of the spray to the piston wall in a real direct-injection diesel engine applying rape-seed oil directly. High swirling air motion and squish flow caused by the piston configurations are taken as measures. Further, flat bottom shape of the piston is applied. Results show that emissions can be improved by the support of air motions. High swirl with toroidal piston is effective to reduce SOF emissions. Re-entrant piston with flat bottom shape offers the best emission performance. Raising gas temperature is also effective to reduce SOF emissions at low load.