Search Results

Multidimensional computations were carried out on a spark-ignition natural gas engine with a bowl-in-piston combustion chamber. The engine in-cylinder flow distributions and their effects on combustion are examined. The fact that the engine swirl would speed up the combustion process is confirmed due to the enhancement of turbulent diffusion process. The engine squish increases both the mean velocity and the turbulence intensity of the gas flow and, therefore, quickens the combustion process. The computations indicate further that the engine swirl impacts the engine in-cylinder flow fields more profoundly than the engine squish does. When the piston bowl is offset, the in-cylinder gas motion can be enhanced considerably. Computations were also made to study the sensitivity of the computed cylinder pressure history to initial values of the selected thermodynamic parameters and chosen initial turbulence conditions.

In previous work the KIVA-II code has been modified to model modem DI diesel engines and their emissions of particulate soot and oxides of nitrogen (NOx). This work presents results from a program to further validate the NOx emissions models against engine experiments with a well characterized modern engine. To facilitate a simplified comparison with experiments, a single cylinder research version of the Caterpillar 3406 heavy duty DI diesel engine was retrofitted to run as a naturally-aspirated, propane-fueled, spark-ignited engine. The retrofit includes installing a low compression ratio piston with bowl, adding a gas mixer, replacing the fuel injector assembly with a spark plug assembly and adding spark and fuel stoichiometry control hardware. Cylinder pressure and engine-out NOx emissions were measured for a range of speeds, exhaust gas residual (EGR) fractions, and spark timing settings.

Multidimensional computations were carried out to simulate the in-cylinder fuel/air mixing process of a direct-injection spark-ignition engine using a modified version of the KIVA-3 code. A hollow cone spray was modeled using a Lagrangian stochastic approach with an empirical initial atomization treatment which is based on experimental data. Improved Spalding-type evaporation and drag models were used to calculate drop vaporization and drop dynamic drag. Spray/wall impingement hydrodynamics was accounted for by using a phenomenological model. Intake flows were computed using a simple approach in which a prescribed velocity profile is specified at the two intake valve openings. This allowed three intake flow patterns, namely, swirl, tumble and non-tumble, to be considered. It was shown that fuel vaporization was completed at the end of compression stroke with early injection timing under the chosen engine operating conditions.

A numerical study of air-fuel mixing in a direct-injection spark-ignition engine was carried out. In this paper, the numerical models are described and grid generation methods to represent a realistic port-valve-chamber geometry is discussed. To model a vaporizing hollow-cone spray resulting from an automotive pressure-swirl injector, a newly developed sheet spray atomization model was used to compute the processes of disintegration of the liquid sheet and breakup of the subsequent drops. Computations were performed of a particular 4-valve pent-roof engine configuration in which the intake process and an early fuel injection scheme were considered. After an analysis of the intake-generated flow structures in this engine configuration, the spray behavior and the spatial and temporal evolution of fuel liquid and vapor phases are characterized.

Multidimensional modeling is used to study air-fuel mixing in a direct-injection spark-ignition engine. Emphasis is placed on the effects of the start of fuel injection on gas/spray interactions, wall wetting, fuel vaporization rate and air-fuel ratio distributions in this paper. It was found that the in-cylinder gas/spray interactions vary with fuel injection timing which directly impacts spray characteristics such as tip penetration and spray/wall impingement and air-fuel mixing. It was also found that, compared with a non-spray case, the mixture temperature at the end of the compression stroke decreases substantially in spray cases due to in-cylinder fuel vaporization. The computed trapped-mass and total heat-gain from the cylinder walls during the induction and compression processes were also shown to be increased in spray cases.

Knocking combustion limits the application of high compression ratios in gasoline engines and therefore obstructs the improvement of thermal efficiency. Predicting knock and knock limited spark advance (KLSA) can guide engine upfront design and optimization before the prototype is built. This study employed three-dimensional computational fluid dynamics (CFD) simulations coupled with an accurate and computation-efficient knock model to predict the KLSA of a turbocharged direct-injection spark-ignition engine. The knock model predicted the end-gas auto-ignition based on a Livengood-Wu (L-W) integral transport equation instead of directly using detailed chemical mechanisms, which was able to achieve a fast computation time. To keep the predictability, ignition delay data was calculated using zero-dimensional chemistry simulation and tabulated a priori, which was then used for CFD simulation on the fly.