Search Results

Abstract The flow around and downstream of the front wheels of passenger cars is highly complex and characterized by flow structure interactions between the external flow, fluid exiting through the wheelhouse, flow from the engine bay and the underbody. In the present paper the near wall flow downstream of the front wheel house is analyzed, combining two traditional methods. A tuft visualization method is used to obtain the limiting streamline pattern and information about the near wall flow direction. Additionally, time resolved surface pressure measurements are used to study the pressure distribution and the standard deviation. The propagation of the occurring flow structures is investigated by cross correlations of the pressure signal and a spectral analysis provides the characteristic frequencies of the investigated flow.

Abstract With increasing demands for higher performance along with lower vehicle emissions, lightweight vehicle system construction is key to meet such demands. Suspension and transmission assemblies being the key areas for weight-reduction, we have designed a revolutionary new type of suspension system which combines the suspension links with the powertrain assembly and thus completely eliminates one suspension member. Less weight means lower fuel-consumption with improved passenger-comfort and road-holding due to reduction in unsprung mass. Elimination of a suspension link reduces the overall cost of material, machining & fabrication making our design cost-effective than existing setups. This paper deals with the design and implementation of of our concept. A working prototype is also constructed and tested which completely validates our design.

Abstract Estimating the power demand of a steering system is one of the main tasks during steering system development in the concept phase of a vehicle development process. Most critical for typical axle kinematics are parking maneuvers with simultaneously high rack forces and velocities. Therefore, the focus of the article is a tire model for standstill, which can be parametrized without measurements, only having tire dimensions and conditions (inflation pressure and wheel load) as input. Combined with a double-track model, a vehicle model is developed, which is able to predict the rack force and is fully applicable during the concept phase. The article demonstrates quantitatively that the tie rod forces, and thereby especially the tire bore torque, cause the largest fraction of the power demand at the rack. For this reason, the prediction of the bore torque is investigated in detail, whereby basic approaches from the literature are analyzed and enhanced.

Abstract A new concept of instantaneous wheel turn center (IWTC) is proposed to evaluate and improve multi-axle vehicle steering coordination performance. The concept of IWTC and its calculation method are studied. The index named dispersion of IWTC is developed to evaluate the vehicle steering coordination performance quantitatively. The simulation tests based on a three-axle off-road vehicle model are conducted under different vehicle velocities and lateral accelerations. The simulation results show that the turn centers of different wheels are disperse, and the dispersion becomes larger with the increase of vehicle velocities and lateral acceleration. Since suspension has important influences on vehicle steering performance, the genetic algorithm is used to optimize the suspension hard points and bushing stiffness, aiming at minimizing the dispersion of wheel turn centers (DWTC) to improve the vehicle steering coordination performance.

Abstract The following article illustrates the detailed study of the development of a unique flywheel-based regenerative braking system (f-RBS) for achieving regenerative braking in a commercial electric bus. The f-RBS is designed for installation in the front wheels of the bus. The particular data values for modeling the bus are taken from multiple legitimate sources to illustrate the development strategy of the regenerative braking system. Mechanical components used in this system have either been carefully designed and analyzed for avoiding fatigue failure or their market selection strategies explained. The positioning of the entire system is decided using MSC Adams View®, hence determining a suitable component placement strategy such that the f-RBS components do not interfere with the bus components. The entire system is modeled on MATLAB Simulink® with sufficient accuracy to get various results that would infer the performance of the system as a whole.

Abstract Raceway Brinell damage is one major cause of wheel bearing (hub unit) noise during driving. Original Equipment Manufacturer (OEM) customers have asked continuously for its improvement to the wheel bearing supply base. Generally, raceway Brinelling in a wheel hub unit is a consequence of metallic yielding from high external loading in a severe environment usually involving a side impact to the wheel and tire. Thus, increasing the yielding strength of steel can lead to higher resistance to Brinell damage. Both the outer ring and hub based on Generation 3 (Gen. 3) wheel unit are typically manufactured using by AISI 1055 bearing quality steel (BQS); these components undergo controlled cooling to establish the core properties then case hardening via induction hardening (IH). This paper presents a modified grade of steel and its IH design that targets longer life and improves Brinell resistance developed by ILJIN AMRC (Advanced Materials Research Center).

Abstract The problem addressed in this work is how to formulate accurate targets for coil springs in passenger car suspensions to ensure that the required ride height and wheel rate are achieved. The issue arises because suspensions often tend to introduce significant spring deformations other than a purely axial compression. Although these effects are quite common, their influence on suspension performance is still not well understood. To this purpose, a new enhanced spring model is presented. The theory behind the model is explained and the relationship between spring and suspension performance discussed in detail. To validate formulations, a series of numerical simulations has been carried out demonstrating the model accuracy. Finally, a novel approach to spring target setting is proposed based on this advanced spring model.

Abstract In this article, a hierarchical coordinated control algorithm for integrating active rear steering and driving/braking force distribution (ARS+D/BFD) was presented. The upper-level control was synthesized to generate the required rear steering angle and external yaw moment by using a sliding-mode controller. In the lower-level controller, a control allocation algorithm considering driving/braking actuators and tire forces constraints was designed to assign the desired yaw moment to the four wheels. To this end, an optimization problem including several equality and inequality constraints were defined and solved analytically. Finally, computer simulation results suggest that the proposed hierarchical control scheme was able to help to achieve substantial enhancements in handling performance and stability.

Abstract To gain a better understanding of the characteristics of corrugation, including the development and propagation of corrugation, and impact of vehicle and track dynamics, a computational model was established, taking into account the nonlinearity of vehicle-track coupling. The model assumes a fixed train speed of 300 km/h and accounts for vertical interaction force components and rail wear effect. Site measurements were used to validate the numerical model. Computational results show that (1) Wheel polygonalisation corresponding to excitation frequency of 545-572 Hz was mainly attributed to track irregularity and uneven stiffness of under-rail supports, which in turn leads to vibration modes of the bogie and axle system in the frequency range of 500-600 Hz, aggregating wheel wear. (2) The peak response frequency of rail of the non-ballasted track coincides with the excitation frequency of wheel-rail coupling; the resonance results in larger wear amplitude of the rail.

Abstract Commercial vehicles often incorporate self-steering axles to meet the axle load requirements while providing improved maneuverability, reduced off-tracking, and reduced tire and pavement wear. Market forces promote the design of more efficient self-steering axle products with reduced weight and more features. Manufacturers also work to differentiate their products through unique designs and new concepts. Traditional design methods for self-steering axles include empirical and trial-and-error methods to set the steering mechanism design parameters based on known design baselines and prior experience. For innovative new concepts that are too far from the traditional designs, it is desirable to have alternative ways for evaluating the expected performance. This article introduces a reduced-order model that allows the rapid analysis of the steering dynamic behavior of self-steering axles.

Abstract A way of providing steering redundancy for highly autonomous vehicles or vehicles equipped with steer-by-wire systems by steering the rear axle for directional control of the vehicle has been previously proposed. In this study, we further investigate and improve on that concept and validate it through simulation and experimental testing on a vehicle. Consequently, we show that in the case of failure of primary front axle steering system, the vehicle controller steering command (in the case of autonomous driving) or the driver’s steering command (in the case of a steer-by-wire system) can be mathematically manipulated to generate a steering input at the rear axle, which results in the same yaw rate response as if the vehicle was steered from the front, and thus providing a way to control the vehicle should a failure occur in the primary steering system.

Abstract In this article, a new road load simulation technology is presented for commercial vehicle driveline. In order to assess the performance of vehicle driveline, the chassis dynamometer system is introduced on the basis of the traditional vehicle driveline test bench, which improves the accuracy of the simulation system without the need of complex modeling of commercial vehicle tire dynamics. The vertical load of the vehicle is emulated by the hydraulic loading mechanism, and the influence of the vertical load on commercial vehicle driveline is emulated when the vehicle passes the bumpy road. The evaluate control method of commercial vehicle acceleration inertia based on wheel rotational speed and vehicle dynamics model is designed.

Abstract To reduce the driveline oscillations during the shifting process of electric delivery vans (EDVs), this article proposes a swift and smooth disengagement strategy for the clutch in a dual-speed transmission (DST) system. Firstly, a novel electromechanical clutch actuator (ECA) for the proposed DST is designed and modeled. Then the structure of the DST for EDVs is briefly introduced, and the mathematical model of the DST is derived using the Lagrange method. Since the driveshaft torque is essential and unmeasurable, a Kalman filter is designed to estimate this value. Then the clutch disengagement strategy is proposed based on the estimated torque. Simulation studies are conducted under both normal and disturbed conditions to test the performance of the proposed algorithm. In addition, the processor-in-the-loop (PIL) experiment verifies the real-time ability of the whole algorithm.

Abstract A novel modeling method for the hydraulic hub motor drive system (HHMDS) is proposed to overcome the difficulty of using the complex AMESim model in the hardware-in-the-loop (HIL) test. The hydraulic pipeline model of the HHMDS is simplified by the lumped parameter approach. According to the node cavity method, a set of flow pressure differential equations is derived. These equations are used to describe the dynamic model of the HHMDS. To solve the rigidity problem of the model and improve the real-time performance of simulation, the HHMDS model is simplified with the integrated model and order reduction methods. Then, the simplified model is created through MATLAB/Simulink, and the accuracy of the modeling method is verified. In the three typical operating modes of the heavy commercial vehicle with HHMDS, the simulation results of the Simulink model and AMESim model are basically the same. At last, the model established by the Simulink is used in the HIL test.

The paper was originally published with the authors in the incorrect order. The correct author order should be as follows: Charlotte Fossier, Université de Lyon Dennis Barday, Volvo Group Christophe Changenet, Université de Lyon Fabrice Ville, Université de Lyon Vincent Berier, Volvo Group

Abstract A classical antiskid brake system (ABS) is typically used to control the brake fluid pressure by creating repeated cycles of decreasing and increasing brake force to avoid wheel locking, causing the fluctuation of the brake hydraulic pressure and resulting in vibration during wheel rotation. This article proposes a new approach of skid control for ABS by controlling the disk pad position. This new approach involves using a modest control method to determine the optimal skid that allows the wheel to exert maximum friction force for decelerating the vehicle by shifting the brake pad position instead of modulating the brake fluid pressure. This pad position control (PPC) method works in a continuous manner. Therefore, no rapid changes are required in the brake pressure and wheel rotation speed. To identify the PPC braking performance, braking test simulations and experiments have been carried out.

Abstract In the present study, a truck drive axle and its gear set are analysed. As the gear set is a hypoid or a spiral bevel one, sliding and so tooth friction are an important source of dissipation. Other losses are mainly due to rolling element bearings and oil churning. The power losses are first calculated according to relationships given in ISO technical report. As comparison with test results shows great discrepancies, some modifications of the previous formulae are proposed. The thermal exchanges are also reviewed. Finally, two methods to obtain the bulk temperatures of the gear set are compared: a classical approach which focuses on the gear set only and a global approach which considers the complete axle using the thermal-network method.

Abstract TOC

Abstract Wheel alignment audit systems are used in vehicle service environments to identify vehicles which may benefit from a comprehensive evaluation on a precision static alignment measurement system. Non-contact dynamic wheel alignment audit systems acquire measurement data from vehicles in motion passing between sensors in an inspection lane. The dynamic nature of the moving vehicles introduces variables which are not present when auditing wheel alignment on a static vehicle. Measurement results are affected by changes in vehicle velocity, steering movement, suspension movement, floor surface conditions, tire sidewall profiles, and driver presence, as well as other variables.

Abstract Centrifugal Pendulum Vibration Absorbers (CPVA) are used to reduce the torsional fluctuation of rotating shafts at a certain vibration order. The concept can also be used to reduce the axial or longitudinal vibration of rotating shafts at the desired order. The axial vibration of driveshafts mainly at combustion order, i.e., 2× rpm for four-cylinder engines, is the reason for the generation of a high level of suspension forces and eventually increased levels of noise and vibration inside the passenger compartment of rear-wheel-drive vehicles. The axial vibration of a shaft at multiple orders (1× rpm and 2× rpm) also increases at higher levels of unavoidable parallel or angular misalignment. The vibration at multiple orders needs to be reduced in the vehicle driveline system in rear-wheel-drive vehicles to minimize the noise and vibration and provide enhanced comfort.