Search Results

Abstract The project of lean management is implemented in General Motors India Private Limited, Pune, India plant. The aim of the project is to improve manpower utilization by removing seven types of wastes using lean management system in kitting process. Lean manufacturing or management is the soul of Just-In-Time philosophy and is not new in Automobile manufacture sector where it born. Kitting area is analogs to the modern supermarket where required components, parts, consumables, subassemblies are kept in bins. These bins are placed in racks so that choosing right part at right time can be achieved easily. Video recording, in-person observation, feedback from online operators and other departments such as maintenance, control, supply chain etc. are taken. It is observed that the work content performed by current strength of operators can be performed by less number of operators. After executing this project, it was possible to reduce one operator and increase manpower utilization.

Abstract With highway vehicles using over 20% of the total energy consumption in the United States, making strides in improving their fuel economy will positively influence the nation’s environmental impact. One methodology to accomplish this outcome is by reducing vehicle weight. In this regard, since the internal combustion (IC) engine is a major contributor to the mass of an automobile, it is an ideal area to target. Prior efforts in this area include using alternative materials (e.g., aluminum or magnesium) to decrease weight. Here, additive manufacturing (AM) is an appealing option due to its freedom from typical manufacturing constraints and the ability to produce highly optimized designs using nonconventional powertrain materials (e.g., titanium). The use of AM has the potential to increase reliability, improve performance, decrease production cost, and possibly minimize the number of parts.

Abstract Single point incremental forming (SPIF) is a sheet forming technology giving low volume production with high flexibility characteristics. The flexibility of the process is mainly related to the fact that incremental forming does not require a dedicated die to operate as compared to other forming processes. Polymers are extensively used for many applications because of their good mechanical properties. Considerable research has been reported for the SPIF of metals, but the researches on polymers are in scarce. In the present work, SPIF is performed on one of the polymers known as polyvinyl chloride. The effect of wall angle, feed rate, and step size on springback, thinning, and surface roughness is observed. It was found that the springback mainly depends on the wall angle but it is least dependent on the feed rate. The thinning and the surface roughness also mainly depend on the wall angle but are least dependent on step size.

Abstract Internal combustion (IC) engines are widely used in automotive, marine, agricultural and industrial machineries because of their superior performance, high efficiency, power density, durability and versatility in size and power outputs. In response to the demand for improved engine efficiency and lower CO2 emissions, advanced combustion process control techniques and more renewable fuels should be adopted for IC engines. Lean-burn combustion is one of the technologies with the potential to improve thermal efficiencies due to reduced heat loss and higher ratio of the specific heats. In order to operate the IC engines with very lean air/fuel mixtures, multiple turbulent jet pre-chamber ignition has been researched and developed to extend the lean-burn limit. Turbulent Jet Ignition (TJI) offers very fast burn rates compared to spark plug ignition by producing multiple ignition sites that consume the main charge rapidly.

Abstract Fatigue performance can be a critical attribute for the production of structural parts or components via additive manufacturing (AM). In comparison to the static tensile behavior of AM components, there is a lack of knowledge regarding the fatigue performance. The growing market demand for AM implies the need for more accurate fatigue investigations to account for dynamically loaded applications. A357.0 parts are processed by laser-based powder bed fusion (L-PBF) in order to evaluate the effect of surface finishing on fatigue behavior. The specimens are surface finished by shot peening using ϕ = 0.2 and ϕ = 0.4 mm steel particles and ϕ = 0.21-0.3 mm zirconia-based ceramic particles.

Abstract The need for high efficiency automotive engines has led to more complex air handling and fuel injection systems, higher compression ratios, more advanced combustion and aftertreatment systems, and the use of fuels with higher octane ratings. Higher octane fuels have a lower propensity to knock. This work studies the influence of changing fuel octane rating on two modern production gasoline vehicles, one with a naturally aspirated, port injected engine and the other with a turbocharged, direct injected engine, using fuels with four different octane number grades (with 85, 87, 91, and 93 anti-knock indices) and operated over a variety of driving cycles and temperature conditions. Unlike previous studies, this effort develops and demonstrates a methodology that isolates fuel effects on fuel consumption and provides a clear view of the octane impact on existing vehicles.

Abstract Decision analysis (DA), a well-established discipline in business and engineering, is entering another domain of application due to the advent of Industry 4.0. DA enables optimal decisions by finding system parameters that maximize the utility, or in the presence of uncertainty the expected utility, from the attributes of a system. Whether there is a single decision maker or all decision makers have uniform preferences, determining risk behavior and the resulting utility is well developed in the existing literature. However, variability in preferences has not been satisfactorily addressed. This gap gains added significance in the face of the demands of Industry 4.0 where cyberphysical production systems must drive autonomous decision-making on the factory floor. The decisions must accommodate a distribution of customer and designer preferences, including production auditors within the organization.

Abstract To protect ship equipment of river and sea transport, it is suggested to use polymeric protective coatings based on epoxy diane oligomer ED-20, polyethylene polyamine (PEPA) curing agent and filler, which is a departure from industrial production. Thus the purpose of the work is analysis of major dependency of the properties on the content of fillers that allowed to revealed the critical filler content (furnace black) in composites to form a protective coating with the required set of characteristics. The infrared (IR) spectral analysis was used to investigate the presence of bonds on the surface of particles of the PM-75 furnace black, which allows us to assess the degree of cross-linking of the polymer. The influence of the content of dispersed furnace black on the physicomechanical and thermophysical properties and the structure of the protective coating is investigated.

Abstract Electrolytic hydrogen production equipment has numerous hydrogen pipelines and high-pressure hydrogen storage tanks which may leak hydrogen which can lead to explosions causing damage to the nearby personnel and equipment. The present work modeled hydrogen explosions in a skid-mounted electrolytic hydrogen production unit. The model was first used to predict the area affected by an explosion without protective walls. The effects of protective walls on the flame and overpressure were then studied by modeling explosions with various protective walls at various distances from the opening on the side of the unit. The results show that the protective walls effectively reduced the damage behind the wall. However, the reflected shock waves may cause secondary damage in front of the wall if the protective wall is too close to the opening. Moreover, the protective wall blocks the hydrogen diffusion which increases the flammable gas mass.

Abstract Many consider hydrogen to be the automobile fuel of the future. Indeed, it has numerous characteristics that makes it very attractive. Hydrogen has a much higher energy density than gasoline, can be produced from water, and its only emission is water. However, there are numerous challenges associated with hydrogen. In particular, the production of hydrogen is a key issue. Currently, most hydrogen is developed from methane, resulting in hydrogen having a carbon footprint. New investments into electrolysis from renewable energy sources is showing promise as an alternative for generating hydrogen. Further, the distribution of hydrogen poses many problems, requiring substantial infrastructure to support a hydrogen economy. Additionally, hydrogen storage is a key issue since most conventional storage mechanisms are overly bulky. If these three issues can be addressed, hydrogen is posed for being a key fuel as the world tries to move away from fossil fuels.

Abstract While new materials are introduced in the automotive industry regularly, there seems to be a lack of generalized frameworks for how to do this efficiently and effectively. Multiple studies have been published on material substitution in a specific component, but the applicability of these to other projects are unclear. Therefore, the authors propose a generalized framework for introduction of new materials in existing production systems in this article. In a study based on three cases in the Swedish automotive industry, the authors have found generalizable insights on challenges and opportunities when introducing new materials that could be converted into a framework for introduction of new materials in the automotive industry. This framework contains both organizational and technological aspects of new material introduction, and is built chronologically from the start of a material strategy framework formulation to the start of a material introduction project.

Abstract Additive manufacturing (AM) technologies can produce lighter parts; reduce manual assembly processes; reduce the number of production steps; shorten the production cycle; significantly reduce material consumption; enable the production of prostheses, implants, and artificial organs; and produce end-user products since it is used in many sectors for many reasons; it has also started to be used widely, especially in the field of aerospace. In this study, polylactic acid (PLA) was preferred for the antenna substrate because it is environmentally friendly, easy to recycle, provides convenience in production design with a three-dimensional (3D) printer, and is less expensive compared to other available materials. Copper (Cu) tape and graphene filament were employed for the antenna patch component due to their benefits.

Abstract Milling is a prevalent machining technique employed in various industries for the production of metallic and non-metallic components. This article focuses on the optimization of cutting parameters for polyamide (PA6) using carbide tools, utilizing a recently developed multi-objective, nature-inspired metaheuristic algorithm known as the Multi-Objective Grasshopper Optimization Algorithm (MOGOA). This optimization process’s primary objectives are minimizing surface roughness and maximizing the material removal rate. By employing the MOGOA algorithm, the study demonstrates its efficacy in successfully optimizing the cutting parameters. This research’s findings highlight the MOGOA algorithm’s capability to effectively fine-tune cutting parameters during PA6 machining, leading to improved outcomes in terms of surface roughness reduction and enhanced material removal rate.

Abstract Gear transmission error (TE) is one of the internal excitation on transmission system vibration and noise. The vibration analytical model of transmission system was constructed by considering the dynamical characteristics of a gear box, which were verified by comparing the modal frequency and mode shapes between simulation results and experiment data. The vibration and radiated noise of transmission was analyzed by the transmission NVH test data. The mechanism of load conditions, TE, and system resonance influence on transmission system vibration and noise are investigated in details. Based on the vibration analysis model, the effects of pitch error, helix tilt deviation, and radial runout error on gear pair meshing characteristics and system vibration response are studied individual.

Abstract Recently, lean manufacturing (LM) practices are being combined with tools and techniques that belong to other areas of knowledge such as risk management (RM). Value stream mapping (VSM) is a well-known tool in showing the value, the value stream, and the flow, which represents the three lean principles. VSM and RM, when used in tandem with one another, are more advantageous in covering VSM issues such as the variability of production processes. In this article, a conceptual model that integrates the two is shown and explained. The model helps to generate scenarios of current state map (CSM) and future state map (FSM) in a dynamic way by identifying current and potential risks. These risks might happen in the future, bringing with it negative ramifications including not reaching the main objectives within the defined time. The model has been tested in a coffee production company belonging to health and food sector.

Abstract This study underscores the benefits of refining the intralogistics process for small- to medium-sized manufacturing businesses (SMEs) in the engineer-to-order (ETO) sector, which relies heavily on manual tasks. Based on industrial visits and primary data from six SMEs, a new intralogistics concept and process was formulated. This approach enhances the value-added time of manufacturing workers while also facilitating complete digital integration as well as improving transparency and traceability. A practical application of this method in a company lead to cutting its lead time by roughly 11.3%. Additionally, improved oversight pinpointed excess inventory, resulting in advantages such as reduced capital needs and storage requirements. Anticipated future enhancements include better efficiency from more experienced warehouse staff and streamlined picking methods. Further, digital advancements hold promise for cost reductions in administrative and supportive roles.

Abstract Being an engineer-to-order (ETO) operating industry, the control cabinet industry faces difficulties in process and workplace optimizations due to changing requirements and lot size one combined with volatile orders. To optimize workplaces for employees, current literature is focusing on ergonomic designs, providing frameworks to analyze workplaces, leaving out the optimal design for productivity. This work thus utilizes a Kano analysis, collecting empirical data to identify essential design requirements for assembly workplaces, incorporating input from switchgear manufacturing employees. The results emphasize the need for a balance between ergonomics and efficiency in workplace design. Surprisingly, few participants agree on the correlation between improved processes and workspaces having a positive impact on their well-being and product quality.

Abstract In the process of injection molding, the vacuum pump rear housing is prone to warping deformation and volume shrinkage, which affects its sealing performance. The main reason is the improper control of the injection process and the large flat structure of the vacuum pump rear housing, which does not meet its production and assembly requirements (the warpage deformation should be controlled within 1.1 mm and the volume shrinkage within 10%). To address this issue, this study initially utilized orthogonal experiments to obtain training samples and conducted a preliminary analysis using gray relational analysis. Subsequently, a predictive model was established based on a one-dimensional convolutional neural network (1D CNN).

Abstract Lateral control is an essential part of driverless mining truck systems. However, the considerable steering lag and poor tracking accuracy limit the development of unmanned mining. In this article, a dynamic preview distance was designed to resist the steering lag. Then the vehicle–road states, which described the real-time lateral and heading errors between the vehicle and the target road, was defined to describe the control strategy more efficiently. In order to trade off the tracking accuracy and stability, the Takagi–Sugeno (TS) fuzzy method was used to adjust the weight matrix of the linear quadratic regulator (LQR) for different vehicle–road states. Based on the actual mine production environment and the TR100 mining truck, experimental results show that the TS-LQR algorithm performed much better than the pure pursuit algorithm.