Search Results

Training / Education

Diesel Engine Noise Control Web Course RePlay

Anytime

This web course provides an in-depth overview of diesel engine noise including combustion and mechanical noise sources. In addition, the instructor will discuss a system approach to automotive integration including combining sub-systems and components to achieve overall vehicle noise and vibration goals.

Training / Education

Materials Degradation in Mechanical Design: Wear, Corrosion, Fatigue, and Their Interactions Web Course RePlay

Anytime

Materials degradation from environmental conditions is a common factor that will often occur in mechanical equipment used in every type of environment. These processes can frequently materialize in unpredicted and harmful ways, especially when they interact and lead to early component damage or failure. Captured from five, two-hour sessions, this course summarizes the mechanisms that cause materials and mechanical components to degrade in service through exposure to deleterious mechanical and environmental conditions.

Training / Education

Metals Bundle

Anytime

Almost 75% of all elements are metals. Metals can be classified as either ferrous or non-ferrous and generally conduct electricity and heat well. Most metals are malleable and ductile and are, in general, heavier than other elemental substances. The following six eLearning courses are included in the Materials bundle. Each course is approximately one-hour in duration. See topics/outline for additional details. Introduction to Metals, Ferrous Metals, Nonferrous Metals, Classification of Steel, Essentials of Heat Treatment of Steel Exotic Alloys

Training / Education

Aluminum Metallurgy

Anytime

There are a wide variety of wrought aluminum alloys, each developed to provide specific properties. Getting the strength participants need in an aluminum alloy requires knowledge of the effects of alloy composition, cold-working, and heat treating on aluminum metallurgy and properties. A good understanding of how aluminum alloys behave and what can be done to modify their properties is critical for being more productive and profitable. The course takes about one hour to complete and consists of one module and a final exam. Also, quizzes and problems provide participants opportunities to apply the concepts taught.

Training / Education

Metallurgy of Steel: Principles

Anytime

Getting the strength and hardness you need in your steel requires knowledge of the effects of alloy composition and heat treating on steel properties. With knowledge of steel metallurgy you’ll be better able to: Select the most appropriate alloy and heat treating process for your application Evaluate suppliers Develop manufacturing processes Solve quality problems A good understanding of what can be done to modify the properties of steel is critical for being more productive and profitable.

Training / Education

Ferrous Metals Bundle: Steel and Cast Iron

Anytime

Ferrous metals contain iron and are prized for their tensile strength and durability. Most are magnetic and contain a high carbon content which generally makes them, with the exception of wrought iron and stainless steel, vulnerable to rust. The following seven eLearning courses are included in the Ferrous Materials Bundle: Steel and Cast Iron. Each course is approximately one-hour in duration. Modules include: Introduction to Physical Properties, Introduction to Mechanical Properties, Introduction to Metals, Hardness Testing, Ferrous Metals, Classification of Steel, Essentials of Heat Treatment of Steel.

Training / Education

FEA Beyond Basics: Thermal Analysis Web Course RePlay

Anytime

Finite Element Analysis (FEA) is a powerful and well recognized tool used in the analysis of heat transfer problems. However, FEA can only analyze solid bodies and, by necessity thermal analysis with FEA is limited to conductive heat transfer. The other two types of heat transfer: convection and radiation must by approximated by boundary conditions. Modeling all three mechanisms of heat transfer without arbitrary assumption requires a combined use of FEA and Computational Fluid Dynamics (CFD).

Training / Education

Foundations for Implementing Root Cause Analysis

Anytime

Effective problem solving isn't just a quality function, and it's not just for operations or engineering. Effective problem solving is a valuable skill set needed throughout an organization. By working through a plausible scenario, you'll assess your own problem-solving skills and experience how tempting it is to jump to solutions or try to fix the problem without investigating and understanding all the underlying causes. Though sometimes effective in the short-term, jumping to solutions can be unreliable, wasting time, money, and effort.

Training / Education

Introduction to Design Review Based on Failure Modes (DRBFM) Web Course RePlay

Anytime

This course will explain all phases of the DRBFM methodology and provide details on how to accomplish the specific steps. With the Design Review Based on Failure Modes (DRBFM) and Design Review Based on Test Results (DRBTR) Process Guidebook that is bundled with the course, the instructor will provide specific information on each step. Formats, examples, notes and homework slides will be used to illustrate the defined steps of the new SAE J2886 DRBFM Recommended Practice. Similarities in content between DRBFM and FMEA will be discussed, however the focus will be on conducting DRBFM methodology.

Training / Education

Additive Manufacturing Bundle

Anytime

Many companies are starting to recognize the benefits additive manufacturing (AM) offers in terms of speed, simplicity, reliability, and cost. Additive manufacturing is a process in which a three-dimensional computer model design s built into a physical object by joining thin layers of material. AM is a versatile field that encompasses a variety of methods, materials, and applications. The one-hour courses in this bundle explain the fundamental concepts of additive manufacturing, including the main principles behind AM and the safety precautions to take during the process.

Training / Education

FEA Beyond Basics: Nonlinear Analysis Web Course RePlay

Anytime

Finite Element Analysis (FEA) has been an indispensable tool for design simulation for several decades but this wide spread use has been limited to simple types of analyses. Relatively recently, more advanced analyses have given easy-to-use interfaces enabling design engineers to simulate problems formerly reserved for analysts. FEA Beyond Basics targets the FEA users who wish to explore those advanced analysis capabilities. It will demonstrate how to move past the ubiquitous linear structural analysis and solve structural nonlinear problems characterized by nonlinear material, large displacements, buckling or nonlinear connectors.

Training / Education

Vibration Analysis Using Finite Element Analysis (FEA) Web Course RePlay

Anytime

This six-session course introduces vibration analysis performed with Finite Element Analysis (FEA). By considering time-dependent loads and inertial and damping effects, vibration analysis allows for a more in-depth product simulation thus reducing product development cost and time. The course reviews basic concepts of vibration analysis and illustrates how they are implemented in FEA to simulate product behavior. The most common types of vibration analysis such as modal, time response, and frequency response will be covered. The textbook, Engineering Analysis with SolidWorks® Simulation, by Paul Kurowski, is recommended reading.

Training / Education

Out-Innovate the Competition

Anytime

Well-intentioned leaders, in their attempts to boost innovation, are inadvertently destroying it. Based on Stephen Shapiro’s bestselling book, Best Practices are Stupid: Ways to Out-Innovate the Competition, this online learning experience offers counterintuitive yet proven strategies for boosting innovation and making it a repeatable, sustainable, and profitable process. He teaches that innovation isn't just about generating occasional new ideas; it's about staying consistently one step ahead of the competition.

Training / Education

Vehicle Sound Package Materials Web Course RePlay

Anytime

This four-session course provides a detailed understanding of the source–path-receiver relationship for developing appropriate sound package treatments in vehicles, including automobiles, commercial vehicles, and other transportation devices. The web course provides a detailed overview of absorption, attenuation (barrier), and damping materials and how to evaluate their performances on material, component, and vehicle level applications. A significant part of this course is the case studies that demonstrate how properly designed sound package materials successfully address vehicle noise issues.

Training / Education

Doing the Right Things Right

Anytime

Based on the book by bestselling author/award-winning speaker Laura Stack, Doing the Right Things Right: How the Effective Executive Spends Time, this course focuses on to obtain profitable, productive results by managing two critical values: effectiveness and efficiency. Stack describes her 3T Leadership model, 12 practices to enable executives to apply these values, grouped into three areas where leaders spend time: strategic thinking, teamwork, and tactics. Following an assessment of personal productivity practices, learn how to build and apply these practices to situations that require making tough choices about managing time.

Training / Education

AS7489: Aerospace Coating Fundamentals for ACAS Personnel

Anytime

This introductory AS7489 certification course provides both new and tenured aerospace coatings application specialists (ACAS) with technical training on safety and engineering compliance. Topics specific to the successful preparation and coatings application of aircraft substrates will be the central focus. This course is approved by Probitas Authentication and the successful completion of this course fulfills the training requirements for SAE AS7489 ACAS Course I Certification.

Training / Education

Introduction to Weibull Solution Methods

Anytime

Weibull Analysis is the starting point for solving most issues related to product reliability, maintainability, supportability, quality, safety, test planning, and cost control. Weibull Analysis is popular worldwide as the best method for modeling and predicting variability and failure of designs, products, and systems. Instructor Wes Fulton will provide a solid overview of Weibull Solution Methods including an explanation of 16 additional Weibull Analysis capabilities, or Weibull Extensions.

Training / Education

Electrodes to Cells

Anytime

This course explains how a lithium-ion cell can be designed, sized, and produced for a specific capacity and energy. The key steps in the selection and production of the main components of the cell, i.e. electrodes, separator, and electrolyte, are discussed. The slurry formulation, mixing, coating, drying, calendaring, cutting, stacking, electrolyte formulation/injection, sealing/packing, and formation cycles are detailed both in terms of machineries and the processing parameters.

Training / Education

Adhesives Bundle

Anytime

Manufacturers increasingly rely on adhesives to assemble a variety of products, such as cars, computers, furniture, and toys. An adhesive is a substance used to join two or more materials. Adhesive bonding is the process of placing an adhesive between two surfaces, or substrates, and allowing it to harden, or cure. Structural adhesives are most commonly used in adhesive bonding, since they can easily withstand heavy loads. Epoxies, anaerobics, acrylics, silicones, urethanes, and cyanoacrylates are commonly used structural adhesives. These courses explain the fundamental concepts of adhesive bonding as they apply to product assembly.

Training / Education

Introduction to Finite Element Analysis (FEA)

Anytime

Finite Element Analysis (FEA) is a computer-aided engineering (CAE) tool used to analyze how a design reacts under real-world conditions. Useful in structural, vibration, and thermal analysis, FEA has been widely implemented by automotive companies and is used by design engineers as a tool during the product development process. Design engineers analyze their own designs while they are still in the form of easily modifiable CAD models to allow for quick turnaround times and to ensure prompt implementation of analysis results in the design process.