Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 1333
HISTORICAL
2001-07-01
Standard
AIR5359A
These requirements are applicable to Accreditation Bodies, Registrars and OEMs, when specified by an aerospace company requiring assessment and/or registration of their quality system in accordance with the requirements of this document. The quality management system standard shall be AS9000 or AS9100 and shall be applied to the organization’s complete Quality System that covers aerospace products.
HISTORICAL
2000-03-01
Standard
AIR5359
This procedure shall be applied by ANSI-RAB or other Accreditation Bodies to registrars that meet the criteria of 5.2 of this document, when specified by an aerospace company requiring assessment and/or registration of their quality system to the requirements of this procedure. The quality system standard shall be AS9000 or AS9100 and shall be applied to the supplier's complete Quality System that covers aerospace products.
HISTORICAL
2003-07-23
Standard
AIR5359B
The requirements defined in this AIR are applicable to Accreditation Bodies (ABs), Certification/Registration Bodies (CRBs), and Original Equipment Manufacturers (OEMs), during assessment and/or certification/registration to the applicable quality management system standard to meet industry accepted practices.
CURRENT
2008-01-16
Standard
AIR5359C
The requirements defined in this AIR are applicable to Accreditation Bodies (ABs), Certification/Registration Bodies (CRBs), and Original Equipment Manufacturers (OEMs), during assessment and/or certification/registration to the applicable quality management system standard to meet industry accepted practices.
HISTORICAL
2001-06-01
Standard
AIR5493
This document shall be applied by accreditation bodies, registrars and other providers of training for the instruction of auditors or other professionals for specialization for the aerospace industry per the requirements of AIR5359. Additionally, this document applies to all organizations qualifying Aerospace Auditors in support of Aerospace Quality Systems standards AS9000 and AS9100.
HISTORICAL
2003-05-15
Standard
AIR5493A
This document shall be applied by course approval bodies, accreditation bodies, CRBs and other providers of training for the instruction of auditors or other professionals for specialization for the aerospace industry per the requirements of SAE AIR5359. Additionally, this document applies to all organizations qualifying Aerospace Auditors in support of Aerospace Quality Systems standards.
CURRENT
2009-07-29
Standard
AIR5493B
This document has been declared “CANCELLED” as of July 2009 and has been superseded by AS9104/3. By this action, this document will remain listed in the Numerical Section of the Aerospace Standards Index noting that it is superseded by AS9104/3.
HISTORICAL
1950-12-01
Standard
AMS2251A
This specification covers established inch/pound manufacturing tolerances applicable to low-alloy steel bars ordered to inch/pound dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "exclusive " is used to apply only to the higher figure of the specified range.
HISTORICAL
1945-05-01
Standard
AMS2251
This specification covers established inch/pound manufacturing tolerances applicable to low-alloy steel bars ordered to inch/pound dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "exclusive " is used to apply only to the higher figure of the specified range.
HISTORICAL
1973-05-15
Standard
AMS2251E
This specification covers established inch/pound manufacturing tolerances applicable to low-alloy steel bars ordered to inch/pound dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "exclusive " is used to apply only to the higher figure of the specified range.
HISTORICAL
1963-01-15
Standard
AMS2251D
This specification covers established inch/pound manufacturing tolerances applicable to low-alloy steel bars ordered to inch/pound dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "exclusive " is used to apply only to the higher figure of the specified range.
HISTORICAL
1952-11-01
Standard
AMS2251C
This specification covers established inch/pound manufacturing tolerances applicable to low-alloy steel bars ordered to inch/pound dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "exclusive " is used to apply only to the higher figure of the specified range.
HISTORICAL
1951-06-01
Standard
AMS2251B
This specification covers established inch/pound manufacturing tolerances applicable to low-alloy steel bars ordered to inch/pound dimensions. These tolerances apply to all conditions, unless otherwise noted. The term "exclusive " is used to apply only to the higher figure of the specified range.
HISTORICAL
2001-10-31
Standard
AMS2301J
This specification covers steel cleanliness requirements in inch/pound units for aircraft-quality ferromagnetic steels, other than hardenable corrosion-resistant steels, by magnetic particle inspection methods.
HISTORICAL
1967-11-01
Standard
AMS2303
This specification covers steel cleanliness requirements for aircraft-quality ferro-magnetic, hardenable corrosion-resistant steels by magnetic particle inspection methods. Applicable primarily to blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, sheet, strip, plate, tubing, and extrusions used in fabricating parts subject to magnetic particle inspection, but may be used for qualification of a heat melt, or lot of steel. This specification covers steel cleanliness requirements for aircraft-quality ferro-magnetic, hardenable corrosion-resistant steels by magnetic particle inspection methods. Applicable primarily to blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, sheet, strip, plate, tubing, and extrusions used in fabricating parts subject to magnetic particle inspection, but may be used for qualification of a heat melt, or lot of steel.
CURRENT
2010-08-18
Standard
AMS2303F
This specification covers steel cleanliness requirements in inch/pound units for aircraft-quality, ferro-magnetic, hardenable, corrosion-resistant steels as determined by magnetic particle inspection methods. This specification contains sampling, specimen preparation, and inspection procedures and cleanliness rating criteria (See 8.2). The metric version, MAM2303, has been cancelled. The SI units have been included in this specification, but the inch-pound units are primary (See 8.5).
HISTORICAL
1991-10-01
Standard
AMS2303B
This specification covers steel cleanliness requirements for aircraft-quality ferro-magnetic, hardenable corrosion-resistant steels by magnetic particle inspection methods. Applicable primarily to blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, sheet, strip, plate, tubing, and extrusions used in fabricating parts subject to magnetic particle inspection, but may be used for qualification of a heat melt, or lot of steel. This specification covers steel cleanliness requirements for aircraft-quality ferro-magnetic, hardenable corrosion-resistant steels by magnetic particle inspection methods. Applicable primarily to blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, sheet, strip, plate, tubing, and extrusions used in fabricating parts subject to magnetic particle inspection, but may be used for qualification of a heat melt, or lot of steel.
HISTORICAL
1978-10-01
Standard
AMS2303A
This specification covers steel cleanliness requirements for aircraft-quality ferro-magnetic, hardenable corrosion-resistant steels by magnetic particle inspection methods. Applicable primarily to blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, sheet, strip, plate, tubing, and extrusions used in fabricating parts subject to magnetic particle inspection, but may be used for qualification of a heat melt, or lot of steel. This specification covers steel cleanliness requirements for aircraft-quality ferro-magnetic, hardenable corrosion-resistant steels by magnetic particle inspection methods. Applicable primarily to blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, sheet, strip, plate, tubing, and extrusions used in fabricating parts subject to magnetic particle inspection, but may be used for qualification of a heat melt, or lot of steel.
HISTORICAL
2002-07-16
Standard
AMS2303E
This specification covers steel cleanliness requirements in inch/pound units for aircraft-quality, ferromagnetic, hardenable, corrosion-resistant steels as determined by magnetic particle inspection methods. This specification contains sampling, specimen preparation, and inspection procedures and cleanliness rating criteria.
CURRENT
2013-01-17
Standard
AMS2281B
This specification establishes maximum permissible limits for elements not normally specified but which may occur in trace amounts in wrought nickel, cobalt, and iron alloy products.
HISTORICAL
2002-08-21
Standard
AMS2281A
This specification establishes maximum permissible limits for elements not normally specified but which may occur in trace amounts in wrought nickel, cobalt, and iron alloy products.
CURRENT
2012-10-30
Standard
AMS2280C
This specification establishes testing methods and maximum permissible limits for trace elements in nickel alloy castings.
HISTORICAL
2006-09-22
Standard
AMS2280B
This specification establishes maximum permissible limits for trace elements in nickel alloy castings.
HISTORICAL
1984-04-01
Standard
AMS2280
This specification establishes maximum permissible limits for trace elements in nickel alloy castings.
HISTORICAL
1978-07-01
Standard
AMS2361A
This specification establishes a procedure for designating minimum elevated temperature tensile property requirements of castings by means of this AMS number and a series of dash numbers. This specification establishes a procedure for designating minimum elevated-temperature tensile property requirements of castings by means of this AMS number and a series of dash numbers.
HISTORICAL
1966-09-01
Standard
AMS2361
This specification establishes a procedure for designating minimum elevated temperature tensile property requirements of castings by means of this AMS number and a series of dash numbers. This specification establishes a procedure for designating minimum elevated-temperature tensile property requirements of castings by means of this AMS number and a series of dash numbers.
HISTORICAL
1973-05-01
Standard
AMS2350W
To establish the issue of specifications, standards, and recommended practices published by standardizing agencies other than divisions and committees of the Aerospace Council of SAE approved for use in determining conformance to requirements of Aerospace Material Specifications (AMS) and other specifications in which this specification is referenced.
HISTORICAL
1974-12-01
Standard
AMS2350Z
To establish the issue of specifications, standards, and recommended practices published by standardizing agencies other than divisions and committees of the Aerospace Council of SAE approved for use in determining conformance to requirements of Aerospace Material Specifications (AMS) and other specifications in which this specification is referenced.
HISTORICAL
1972-11-01
Standard
AMS2350V
To establish the issue of specifications, standards, and recommended practices published by standardizing agencies other than divisions and committees of the Aerospace Council of SAE approved for use in determining conformance to requirements of Aerospace Material Specifications (AMS) and other specifications in which this specification is referenced.
HISTORICAL
1974-06-01
Standard
AMS2350Y
To establish the issue of specifications, standards, and recommended practices published by standardizing agencies other than divisions and committees of the Aerospace Council of SAE approved for use in determining conformance to requirements of Aerospace Material Specifications (AMS) and other specifications in which this specification is referenced.
Viewing 1 to 30 of 1333

Filter

  • Standard
    1333
  • Range:
    to:
  • Year: