Criteria

Text:
Sector:
Topic:
Display:

Results

Viewing 1 to 30 of 7803
2011-11-08
Technical Paper
2011-32-0601
Cary W. Wilson, Frederick R. Schauer, Paul J. Litke, John L. Hoke, Jon-Russell J. Groenewegen
Many of the engines used in Remotely Piloted Aircraft (RPA), come directly from the remote-control (R/C) aircraft market, which turn a propeller but are not necessarily built for the greatest efficiency or reduced fuel consumption. The DoD “single fuel concept” is pushing these platforms to be able to operate with JP-8 using an Otto Cycle engine. Additionally, with increased environmental concern with fossil fuels, possible future DoD requirements could require the use of bio-derived liquid fuels. The research presented in this paper takes steps to satisfying both the efficiency and single fuel requirements. The Fuji BF-34EI engine was successfully shown to operate effectively with JP-8, Diesel, Algae-based Diesel and Camelina based Hydroprocessed Renewable Jet fuel. When generally compared over the entire engine operating map, between AVGAS and JP-8, the latter is shown to present a 10-20% lower brake specific fuel consumption (BSFC).
2007-09-16
Technical Paper
2007-24-0007
Katarzyna BIZON, Gaetano CONTINILLO, Simona S. MEROLA, Bianca M. VAGLIECO
Flame images are collected and Proper Orthogonal Decomposition (POD) coupled with interpolation is applied to reconstruct information in between consecutive measurements. The POD basis is determined from samples (“snapshots”) taken during experiments conducted on an optically accessible Spark Ignition Engine. Reconstructed luminosity fields are then compared with the available (but not used in the computations) experimental data. In a second application, dynamic in-cylinder pressure data collected together with images are compared to those of a “base” cycle and the differences are used to weight the “snapshots” collected over different cycles. By this means, pseudo-cycle-resolved image sequences can be obtained.
2007-10-30
Technical Paper
2007-32-0098
Takafumi YAMADA, Yasuo MORIYOSHI
For a disaster relief and automatic inspections, an unmanned helicopter is strongly expected. To develop this, a very high power density source is required. A Wankel-type rotary engine can be the best candidate for the power source. In this study, the development of a very small rotary engine with a displacement of 30 cc is targeted. In order to improve the combustion efficiency, gas exchange and stable ignition, a multi dimensional simulation inside the combustion chamber was carried out. At first, the effect of volumetric efficiency on the maximum power is mentioned. Secondly, the effect of scavenging efficiency is discussed. Thirdly, a blow off through a plug hole is described. The position of plug hole was found important to reduce the blow off amount. Finally, the effect of combustion speed on the engine performance is predicted. As a result, the proposed design will be tested using a proto-type engine.
2016-02-01
Magazine
Stanford goes solar down under Team takes sixth place in Bridgestone World Solar Challenge to cap a rigorous two-year design and development program. Taking the lead Being in charge of an SAE Student Chapter entails everything from organizing meetings to issuing 'nastygrams.' A winning video from a winning Collegiate Design Series team The defending champion of the Formula SAE Michigan competition, Oregon State University, has found another way to win. SAE U.K. Section co-hosts lecture series 'starring' NASA engineer/expert Dr. Ravi Margasahayam of NASA is the engineer responsible for ensuring payload safety for the Space Shuttle and the International Space Station.
2016-11-16
Magazine
Focus on advanced safety systems and human-factor interventions The impact of REACH on the aviation sector Considered the most comprehensive chemical-regulation legislation to date, REACH presents serious ramifications for the aircraft industry. Lightweighting: What's Next? Experts weigh in on the challenges and future enablers in the battle to reduce vehicle mass. The best of COMVEC 2016 Autonomous vehicles and improved fuel efficiency via advanced powertrain solutions are pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Optimizing waste heat recovery for long-haul trucks Autonomous solutions in agriculture Downsizing a HD diesel engine for off-highway applications Zero-emissions electric aircraft: Theory vs. reality
2010-09-15
Magazine
Powering the future To achieve sales of more than 1000 engines a full two years ahead of the first flight of the aircraft it is being built to power gives an indication ofthe high customer expectations from the most advanced in a long line of engines from Rolls-Royce.
2010-09-08
Magazine
The open rotor engine in the 21st century After consideration in the 1980s, the open rotor turbine engine for aircraft is given another chance. Will today's engineering tools make it more viable this time?
2010-07-21
Magazine
More technology, less fuel Engine makers use several techniques to improve efficiency, cut emissions.
2010-02-01
Magazine
Giving the blind the freedom to drive A Virginia Tech student team answers a call to action by the National Federation of the Blind's Jernigan Institute. 'Ultimate Youthmobile' of 2030 At the 2009 LA Auto Show, California designers envision the future. BMW's six-cylinder motorcycle Concept points to possible production bike. Modeling and simulation put emphasis on early planning The shift to model-based design and simulation is changing the way aircraft are designed, shifting the focus to the early phases of development. Early planning is critical for success, as is establishing techniques that ensure that files move freely between various work teams.
2012-03-14
Magazine
Propulsion systems enabling private space flight While some companies are creating high altitude air and ground launch vehicles for taking private individuals into space, companies such as XCOR Aerospace and Armadillo Aerospace are addressing other market needs in the private space flight industry.
2012-05-16
Magazine
New blades turning Industry is in the midst of new initiatives to develop lighter, stronger aero engine fan blades. ATM revolution-on the way at last A look at one of the biggest issues facing the air transport sector: integrating air traffic management policies and solutions. A new positioning system for aircraft structural assembly The EcoPositioner is a modular and reconfigurable positioning technology that takes into consideration the positioning task as well as operational conditions and environmental influences.
2012-03-30
Magazine
Inside development of Unimore's high-performance Formula SAE engine The adoption of a single-cylinder engine, instead of the more powerful inline four cylinder, required a much bigger effort for getting an acceptable level of power. Academia and motorsports industry partner for enhanced performance A four-year Bachelor of Science degree in motorsports engineering at Indiana University-Purdue University Indianapolis, in addition to certificates in motorsports technology and motorsports studies, has led to the creation of some unique new college classes and associated activities. Propulsion systems for private space flight While some companies are creating high altitude air and ground launch vehicles for taking private individuals into space, companies such as XCOR Aerospace and Armadillo Aerospace are addressing other market needs in the private space flight industry. 200-mph electric racecar Drayson aims to break track records.
2012-04-18
Magazine
Putting electrification to work For fleets, going green is a high priority-but making green is an even higher one. A move to 'more electric' engines Researchers detail a motor control design for the fuel system of a more electric aero engine, focusing on the necessary safety and reliability aspects. 2012-13 Hybrid Vehicles Guide A quick reference to the latest production HEVs and their key specifications.
2012-01-25
Magazine
Alternative fuels heat up This is a rich time for combustion researchers. The need for better fuel efficiency and improved emissions has never been greater. New software model to help engine makers meet diesel soot standards Simulation enables engineers to predict particulate formation early in the design process.
2012-04-27
Magazine
'Infernal' combustion no more Continuous improvements to the 130-year-old ICE aim to keep conventional engines ahead of electric drive. Alternative fuels tested at altitude Federal government researchers in Canada tested certain alternative fuels at simulated altitudes and found that they do offer some benefit.
2011-06-08
Magazine
Avionics go to war Advanced helmet sight systems are being designed to help the situational awareness of those pilots who actually still fly aircraft, while also being seamlessly integrated with the aircraft itself. Model military engine behavior While the concept of a variable cycle engine is not new, recent advances in engine architecture technology suggest that adding a second bypass stream to a traditional turbofan can provide significant benefits. Alternative seals for alternative fuels When considering seal compatibility an aircraft from traditional jet fuel to a synthetic fuel presents an interesting technical challenge that has both financial and practical considerations, especially for aircraft that are already in service.
2015-05-19
Magazine
Getting greener To meet upcoming fuel economy and emissions regulations, the developmental homogeneous charge compression ignition (HCCI) engine shows promise, but pursuit of more conventional engine technologies may be the better path. Highlights of Baja SAEINDIA The 2015 event, the 8th edition with the theme of Beyond Boundaries, was won by the College of Engineering, Pune. Rise of the underdogs Problem-plagued effort last year spurs Baja SAE team from VIT University of India to overhaul itself and its car. Testing reality in an increasingly complex design space Digital simulation tools have transformed the designing and testing of new aircraft, as well as the way they are manufactured and sustained.
2015-12-01
Magazine
Uncertainty quantification The technique is a must for next-generation simulation tools. Oil-pump sizing Researchers from Hinduja Tech investigate options for low friction and power consumption. The future of Indian commercial aviation The growth in traffic that airport modernization has supported has also made a significant contribution to the local and national economies, while the improved infrastructure has been positive for the perception of India in the global market. Driving EVs toward lower cost The race ison to reduce battery and electric-drive systems cost while improving efficiency. Powering on Rolls-Royce's Chief Engineer discusses new technologies that inspire current R&D design and evaluation work as part of its strategic roadmap for future big commercial programs. HMIs extend beyond the cab Telematic functions are being integrated into multi-function user interfaces.
2014-08-12
Magazine
A new Formula for racing The new Formula E series' electric racecars are intended to pioneer new technology for broader use in production, encouraging fans to think differently about the technologies they use. Production of satellite with first all-electric propulsion system advances Electric propulsion has been limited so far to small movements of the satellites once it is in its geostationary orbit. The Boeing 702SP innovation is its use of electric propulsion to raise the satellite from its launch-vehicle drop-off point to geostationary orbit. Using CAE to assess whining noise of electric powertrains To develop an electric powertrain with a minimum noise level and minimized whining it is necessary to have accurate CAE simulation and precise criteria to assess whining noise.
2014-03-05
Magazine
Into the DEAP The Distributed Electrical Aerospace Propulsion project looks toward a future optimized integrated propulsion system that will allow cleaner, quieter, and more efficient performance to be incorporated into a radically innovative airframe that will feature enclosed electrically powered fans. Managing the deluge of data The model-based development (MBD) process has been a key enabler of technical advancement in the transportation industry; however, the MBD process leads to the generation of large volumes of data artifacts and work products. To maintain efficiency while continuously improving the quality of products, it is necessary to be able to manage this data in an efficient manner.
2014-02-03
Magazine
Thermal simulation and testing of expanded metal foils for lightning protection With the implementation of major aircraft structures fabricated from carbon fiber reinforced plastic materials, lightning protection has become a more complicated issue for designers and engineers to solve. Electronics take charge Digital controls are handling more engine control tasks on a wider range of aircraft.
2014-06-02
Magazine
Europe's aerospace industry looking confident Apart from Airbus's highly visible presence in defense and commercial aircraft, Europe also has successful capabilities in helicopters, business jets, and aero engines, and in all these areas their global market share is growing. Comparing blade-element momentum modeling to 3-D CFD Many small unmanned aerial vehicles (SUAVs) are driven by small scale, fixed blade propellers, and the flow produced by the propeller can have a significant impact on the aerodynamics of the SUAV itself.
2013-02-21
Magazine
In hybrid systems, mild beats wild The coming wave of 48-v mild hybrids aim for maximum benefit at minimal cost.
2013-08-21
Magazine
Lithium-ion refinement Even as high-profile fires create concern, battery and car makers accelerate their move toward lithium-ion technology with advances in cost, performance, and safety. NASA's quest for maximum efficiency As part of its hybrid body wing aircraft with turboelectric distributed propulsion system, NASA has proposed to use a superconducting and cryogenic electrical system to connect the electrical output of the generators to the motors.
2015-04-01
Magazine
Propulsion Fanjet Evolution - the Next Steps Composites Dry Drilling Composites Using Carbon Dioxide Cooling
2015-10-01
Magazine
Powering on Rolls-Royce's Chief Engineer discusses how new technologies in the Trent XWB family of engines are inspiring current R&D design and evaluation work as part of its strategic roadmap for future big fanjets. Ongoing development work and associated test programs extend across a broad range of activities and involve many partners. Countering cybersecurity threats against unmanned vehicle systems Cranfield University researchers have developed a monitoring system whose purpose is to monitor mission profile implementation at both high level mission execution and at lower level software code operation to tackle specific threats of malicious code and possible spurious commands received over a vehicle's data links.
2015-06-01
Magazine
Regional and bizjets refined and redefined As the regional and business jet markets steadily rebound, so too do the propulsion technologies that will provide airframers and their customers competitive advantage. Getting it right with composites With composites now a mainstay in most new aircraft designs, the engineering emphasis has switched from understanding if they work to thinking through the most efficient way to manufacture them, such as using design-for-manufacturing software.
2011-03-02
Magazine
Materials become design, design becoems function Once things you could hold in your hand, materials have become more design ideas than entities, and the designs themselves are transforming into operational activity. The next steps in flight A look at sero engine and assembly developments as commercial airframe and engine manufacturers begin the biggest battle of all-for next-generation short-haul jet aircraft sales. NextGen Today and tomorrow The FAA has reached a major milestone on the Next Generation Air Transportation System initiative to modernize America's National Airspace System. Stacking the material deck for the 787 Combinations such as composites and titanium being used in future aircraft programs can be very challenging when drilling holes during manufacturing and assembly operations.
2011-03-31
Magazine
A new model for University research The robotics team at Carnegie Mellon University innovates with a new approach for the funding and commercialization of University research. Automotive and Aerospace engineering education: today and tomorrow Student opportunites in specialized programs continue to grow. Lamborghini is bullish about new flagship Of all the models making their world debut at the 2011 Geneva Motor Show, Lamborghini's Aventador LP 700-4 could claim top honors for new technology. B-Max launches downsized EcoBoost engines The small B-Max MAV uses familiar Ford "kinetic" design cues. Diesel/electric-drive military vehicle at Chicago auto show A military vehicle is designed to perform specific missions, not serve as an environmental showcase.
2011-02-25
Magazine
Formula SAE-a winners again Monash University took the top spot in the 2010 Formula SAE-Australasia student competition for the second year in a row. Dual-fuel lab engines achieve high efficiencies, low emissions Experiments conducted by researchers at the University of Wisconsin-Madison as well as at Oak Ridge National laboratory demonstrate that partial blending of two fuels in the cylinder can promote a more ideal combustion process. Detroit motor show Small and efficient cars stole the show at the recent North American International auto show. nextgen today and tomorrow The FAA has reached a major milestone on the next generation air transportation system initiative to modernize America's national airspace system.
Viewing 1 to 30 of 7803

Filter

  • Range:
    to:
  • Year: