Search Results

This paper covers the development of the General Motors Energy Absorbing Steering System beginning with the work of the early crash injury pioneers Hugh DeHaven and Colonel John P. Stapp through developments and introduction of the General Motors energy absorbing steering system in 1966. evaluations of crash performance of the system, and further improvement in protective function of the steering assembly. The contributions of GM Research Laboratories are highlighted, including its safety research program. Safety Car, Invertube, the biomechanic projects at Wayne State University, and the thoracic and abdominal tolerance studies that lead to the development of the Viscous Injury Criterion and self-aligning steering wheel.

Conceptually, a steering wheel mounted air cushion is inflated before the upper torso of the driver significantly interacts with the cushion. However, this might not be the case for some seating postures or vehicle crash environments which could cause the driver to significantly interact with an inflating cushion. These experiments utilized several environments to study the interaction between an inflating driver air cushion and mechanical surrogates. In these laboratory environments, the measured responses of mechanical surrogates increased with diminishing distance between the surrogate's sternum and the steering wheel mounted air cushion.

The study was directed toward improving our understanding how postcrash column compression and steering wheel deformation relate to the driver interaction with an energy absorbing steering system during automotive collisions. Frontal sled tests conducted at 19–37 km/h investigated the Part 572 antropomorphic dummy interaction with a ball-sleeve column steering assembly over a range of column angles and surrogate postures. Neither column compression nor steering wheel deformation correlated with the mechanical severity of the test surrogate interaction with the steering system. The steering wheel deformed before the column compressed and the degree of wheel deformation strongly depended on the surrogate load distribution, the steering wheel being an important energy absorbing element.

This study identifies important parameters that influence the basic response mechanics of a compressible column steering assembly. Energy can be absorbed either by column compression and/or steering wheel deformation, depending on relative deformation force. Neither column compressive force nor steering wheel deformation force are uniquely defined but depend on several parameters. Steering wheel deformation force is dependent on occupant load distribution. The force necessary to compress the column differs from the column EA element compressive force due to inertial and geometric considerations. For our test conditions and the components we studied, off axis impact resulted in initial steering wheel deformation with the wheel and column sharing energy absorption. Axial impact resulted in almost negligible wheel deformation and the column was the energy absorbing component.