Search Results

Standard

Full Adaptive Forward Lighting Systems

2020-03-12

CURRENT

J2838_202003

This SAE standard provides test procedures, performance requirements, design guidelines and installation guidelines for full adaptive forward lighting systems (AFS).

Standard

Full Adaptive Forward Lighting Systems

2013-03-05

HISTORICAL

J2838_201303

This SAE standard provides test procedures, performance requirements, design guidelines and installation guidelines for full adaptive forward lighting systems (AFS).

Standard

AUXILIARY LOW BEAM LAMPS

1995-03-01

HISTORICAL

J582_199503

This SAE Recommended Practice provides general design and performance requirements, test procedures, and installation guidelines for auxiliary low beam lamps.

Standard

AUXILIARY LOW BEAM LAMP

1973-01-01

HISTORICAL

J582A_197301

This standard provides design requirements and test methods for an auxiliary low beam lamp.

Standard

AUXILIARY LOW BEAM LAMPS

1984-09-01

HISTORICAL

J582_198409

This SAE Technical Report provides general design and performance requirements, test procedures, and installation guidelines for auxiliary low beam lamps.

Standard

Distributed Lighting Systems (DLS)

2011-02-24

CURRENT

J2282_201102

This SAE Recommended Practice applies to motor vehicle Distributed Lighting Systems (DLS) which use light generated by remote sources. It provides test methods, requirements, and guidelines applicable to these systems. This document is intended to be a guide to standard practice and is subject to change dependent upon additional experience and technical advances. This document covers Headlamp, Fog lamp, Auxiliary lamp, plus Signal and Marking lamp functions.

Standard

Distributed Lighting Systems (DLS)

2007-08-21

HISTORICAL

J2282_200708

This SAE Recommended Practice applies to motor vehicle Distributed Lighting Systems (DLS) which use light generated by remote sources. It provides test methods, requirements, and guidelines applicable to these systems. This document is intended to be a guide to standard practice and is subject to change dependent upon additional experience and technical advances. This document covers Headlamp, Fog lamp, Auxiliary lamp, plus Signal and Marking lamp functions.

Standard

DIMENSIONAL SPECIFICATIONS FOR GENERAL SERVICE SEALED LIGHTING UNITS

1997-04-01

HISTORICAL

J760_199704

This SAE Recommended Practice provides dimensional specifications for general service sealed lighting units, intended for use in such applications as motorcycle headlamps, military headlamps, industrial machinery headlamps, fog lamps, spot lamps, etc. See Figures 1 and 2 and Tables 1 and 2.

Standard

Dimensional Specifications for General Service Sealed Lighting Units

1999-06-01

HISTORICAL

J760_199906

This SAE Recommended Practice provides dimensional specifications for general service sealed lighting units, intended for use in such applications as motorcycle headlamps, military headlamps, industrial machinery headlamps, fog lamps, spot lamps, etc. See Figures 1 and 2 and Tables 1 and 2.

Standard

Dimensional Specifications for General Service Sealed Lighting Units

2004-06-14

HISTORICAL

J760_200406

This SAE Recommended Practice provides dimensional specifications for general service sealed lighting units, intended for use in such applications as motorcycle headlamps, military headlamps, industrial machinery headlamps, fog lamps, spot lamps, etc. See Figures 1 and 2 and Tables 1 and 2.

Standard

REPLACEABLE BULBS FOR HEADLAMPS

1988-11-01

HISTORICAL

J1496_198811

This technical report covers performance requirements, design requirements, and design guidelines for replaceable bulbs which may be used in headlamp applications.

Standard

Headlamp Design Guidelines for Mature Drivers

2011-02-24

CURRENT

J1606_201102

This SAE Information Report should be used as a supplement to SAE J1383 (Reference 2.1.1). It is intended to provide additional information which is important to the automotive designer and engineer in the process of designing, developing, and engineering the headlamps of motor vehicles which will take into account the effects of the aging process on the driver.

Standard

Recommendations of the SAE Task Force on Headlamp Mounting Height

2011-02-24

CURRENT

J2338_201102

The SAE International task force on headlamp mounting height has considered the ramifications of reducing the maximum mounting height of headlamps on highway vehicles. The task force has concluded that it is in the best interest of the driving public to make a substantial reduction in the recommended maximum height at which headlamps, particularly low-beam headlamps, may be mounted. Heights as low as 36 to 40 in (90 to 100 cm) have been considered. New tractor vehicles are in fact being designed with headlamps mounted in this range. Further recommendations were withheld in anticipation of tests to demonstrate the effect of mounting height on the legibility of certain overhead signs.

Standard

Dimensional Specifications for General Service Sealed Lighting Units

2013-06-06

HISTORICAL

J3003_201306

This SAE Recommended Practice provides dimensional specifications for the 41/2 and 53/4 inch general service sealed lighting units, intended for use in such applications as motorcycle headlamps, military headlamps, industrial machinery headlamps, fog lamps, spot lamps, etc. See Figures 1 and 2 and Tables 1 and 2.

Standard

Dimensional Specifications for General Service Sealed Lighting Units

2017-11-16

CURRENT

J3003_201711

This SAE Recommended Practice provides dimensional specifications for the 41/2 and 53/4 inch general service sealed lighting units, intended for use in such applications as motorcycle headlamps, military headlamps, industrial machinery headlamps, fog lamps, spot lamps, etc. See Figures 1 and 2 and Tables 1 and 2.

Standard

Dimensional Specifications for General Service Sealed Lighting Units

2012-09-11

HISTORICAL

J3003_201209

This SAE Recommended Practice provides dimensional specifications for the 114mm (4½ inch) and 146mm (5¾ inch) general service sealed lighting units, intended for use in such applications as motorcycle headlamps, military headlamps, industrial machinery headlamps, fog lamps, spot lamps, etc. See Figures 1 and 2 and Tables 1 and 2.

Standard

Headlamp Mounting Height for Passenger and Pickup Truck Vehicles

2002-09-30

HISTORICAL

J2584_200209

The Mounting Height Task Force was tasked to determine the extent of the problem(s) associated with vehicle headlamps mounted at or above the level of the mirror(s) in passenger vehicles; the level of glare exposure caused by high-mounted headlamps; the appropriate height differential needed to maintain a glare level consistent with past and/or current passenger vehicle headlamp mounting; and the necessary headlamp mounting height necessary to control mirror glare at an accepted/acceptable level. The report herein addresses these passenger vehicle mounting height issues.

Standard

Headlamp Mounting Height for Passenger and Pickup Truck Vehicles

2011-02-24

CURRENT

J2584_201102

The Mounting Height Task Force was tasked to determine the extent of the problem(s) associated with vehicle headlamps mounted at or above the level of the mirror(s) in passenger vehicles; the level of glare exposure caused by high-mounted headlamps; the appropriate height differential needed to maintain a glare level consistent with past and/or current passenger vehicle headlamp mounting; and the necessary headlamp mounting height necessary to control mirror glare at an accepted/acceptable level. The report herein addresses these passenger vehicle mounting height issues.

Standard

Limited Adaptive Forward Lighting System

2017-05-19

CURRENT

J2591_201705

This SAE Recommended Practice applies to motor vehicle Forward Illumination Devices which incorporate limited adaptive beam pattern capabilities. This document is to be used in conjunction with other forward lighting standards and/or recommended practices which define the base beam procedures, requirements, and guidelines.

Standard

Limited Adaptive Forward Lighting System

2023-04-21

WIP

J2591

This SAE Recommended Practice applies to motor vehicle Forward Illumination Devices which incorporate limited adaptive beam pattern capabilities. This document is to be used in conjunction with other forward lighting standards and/or recommended practices which define the base beam procedures, requirements, and guidelines.